ZZR600 Engine Bolt Torque settings

I know I asked this months ago, but I've lost the answer cos I procrastinated too long.
Really a question for Mick (the one with my bike's twin) with his service manual.

Can you (or anyone else) tell me the torque settings for the 2 side engine bolts (left and right) that are behind the lower fairing as in the attached pic please?
I've decided I'm just going to suck it up and drill the fairing to fit the crash knobs I got months ago - I want to fit them before I head to the track in 2 weeks.

Thanks
ty

Attachments

zzr6oggy.jpg (46.73 KiB) Viewed 4073 times

Ty
In the zx6r manual its in section 1-20
Engine mounting bolts and nuts 33lb
Engine mounting locknuts 36lb
Engine mounting bracket bolts 18lb

mario
Should be the same at a quess cant see why not.

I'd just tighten the sucker.. No excessively just give it enough..

It's an crash knob.. Mate you come off, that bolts gunna be busted off in there anyways


That's the way I look at it anyways.. Plus the fact I don't have a talk wrench...

hehehe

In the zx6r manual its in section 1-20
Engine mounting bolts and nuts 33lb
Engine mounting locknuts 36lb
Engine mounting bracket bolts 18lb

So should be that first one yeah? ie 33lb?

That's the way I look at it anyways.. Plus the fact I don't have a talk wrench...

Suprised you didn't say 'talk wench'
ty

This any help?

Mick

Attachments

enginebolts.jpg (108.11 KiB) Viewed 4046 times

enginebolts2.jpg (18.86 KiB) Viewed 4045 times

Thanks Mick,
I also got a call from Colette (and Steve) last night to help out.
Looks like it's 36ft-lbs, but I'll need to check what the bolt actually looks like. I think it's that T3 bolt on your pic which also say 36ft-lbs - so that's a good sign.
Thanks to Colette, Steve and Mick - I'll be drilling the baby this weekend
ty

And thanks to Mario too - he PM'ed me some tips on how to drill the fairing neatly and in the right place - using tape around the drill area and putty on the inside of the fairing to mark the bolt position amongst other things.
ty