Page 1 of 1

HELP - ZX636 05 Headlight Issue

PostPosted: Sun May 13, 2012 11:07 pm
by all_mee
Hi Guys,

I have a strange problem with my 05 zx636. If I give any gear a good rip past ~12,000rpm, my headlight turns itself off. This was pretty scary the other day when I was driving at high speeds at night. I've now noticed that if this happens, I can reactivate my headlights by turning on my indicator, and then turning it off again. As soon as I do that, the headlight turns itself back on.

Strange problem - anyone heard of this? And how do I fix it??

Re: HELP - ZX636 05 Headlight Issue

PostPosted: Sun May 13, 2012 11:28 pm
by 6maniac
Keep rpm to 11999 or less .... :shock:

Re: HELP - ZX636 05 Headlight Issue

PostPosted: Wed May 16, 2012 6:53 pm
by Saki
I assume you've modded your bike some how ? Or is it stock ?

Re: HELP - ZX636 05 Headlight Issue

PostPosted: Thu May 17, 2012 8:48 am
by all_mee
Bike is completely stock besides a slip on exhaust that was professionally installed years ago. Electronics have never been tampered with. I take it this isn't a common fault

HELP - ZX636 05 Headlight Issue

PostPosted: Thu May 17, 2012 8:56 am
by tim
Not common, might make sense to an auto electrician. If you can post a link to the wiring schematic of your bikes electrical system we might be able to give you a hand...

First thing I would do would be to pull apart the light/blinker switch block on the handlebar and spray everything with contact cleaner, turn switches on and off fast over and over, look for corrosion/breaks etc.

HELP - ZX636 05 Headlight Issue

PostPosted: Thu May 17, 2012 9:05 am
by tim
Another thing to do is see if you can duplicate it just sitting there revving it... If it still happens will helpyou diagnose it

Re: HELP - ZX636 05 Headlight Issue

PostPosted: Thu May 17, 2012 11:53 pm
by all_mee
tim wrote:Not common, might make sense to an auto electrician. If you can post a link to the wiring schematic of your bikes electrical system we might be able to give you a hand...

First thing I would do would be to pull apart the light/blinker switch block on the handlebar and spray everything with contact cleaner, turn switches on and off fast over and over, look for corrosion/breaks etc.


Thanks Tim. Will start revving in the garage to see if the problem persists.

Do u have any idea where to start when pulling apart the light/blinker switch box?

Re: HELP - ZX636 05 Headlight Issue

PostPosted: Fri May 18, 2012 1:54 am
by tim
The bolt that holds it together ;)

Re: HELP - ZX636 05 Headlight Issue

PostPosted: Fri May 18, 2012 1:58 am
by Blurr
6maniac wrote:Keep rpm to 11999 or less .... :shock:



12K on a 6r is just above idle :lol:

HELP - ZX636 05 Headlight Issue

PostPosted: Fri May 18, 2012 6:45 am
by Wattie
Blurr wrote:
6maniac wrote:Keep rpm to 11999 or less .... :shock:



12K on a 6r is just above idle :lol:


Dont they idle at 7k?

Re: HELP - ZX636 05 Headlight Issue

PostPosted: Tue May 22, 2012 7:49 pm
by loubre
Wattie wrote:
Blurr wrote:
6maniac wrote:Keep rpm to 11999 or less .... :shock:



12K on a 6r is just above idle :lol:


Dont they idle at 7k?


Nah That's just where the fun starts :P

HELP - ZX636 05 Headlight Issue

PostPosted: Tue May 22, 2012 8:40 pm
by StuMiller
Try doing a wheelie and see if that helps.

Then maybe a burnout at 13k rpm...I think that will do the trick!