holdontight wrote:There may be 2 types of link pipe for the 10 from Acro as the USA don't run a O2 sensor in there system. I found out the hard way with a Yoshi system I took delivery of yesterday. Had to track down a adapter, pop a whole and weld it in.
Just in case you need to know the adapter is a M12 with a 1.25 thread pitch.
Mickwitchy wrote:Anyone know if you can just fit a link pipe (with O2 sensor) and go riding? Or is this bad for the engine?
shannony wrote:I Wouldnt risk it, It will probably run to lean and cause some kind of damage, apparantly the ECU does a good job of trying to fix things but only if you just go the CAN and not the link pipe.
I have just installed both on my bike with a PCV and 02 Optimizer now its off to the tuners,
shannony wrote:I Wouldnt risk it, It will probably run to lean and cause some kind of damage, apparantly the ECU does a good job of trying to fix things but only if you just go the CAN and not the link pipe.
Return to ZX-R / Ninja Current Model Discussion
Users browsing this forum: No registered users and 8 guests