ZXR750 track bike build

ZX2R, ZXR400, ZXR750, ZX6R, ZX7R, ZX9R & ZX12R & others.

ZXR750 track bike build

Postby zxrmad » Sat Jul 09, 2016 8:36 am

Just thought I'd post some pics of my track bike build over the last year or so...

Image
I bought the bike as an unfinished project. No bodywork and everthing else pretty much stock except for the FCR's and carbon airbox.

Image

Image

Image
Bought this carbon fibre bodywork including carbon fibre tank from a nice chap in Sydney who was parting out his race bike.

Image

Image
Dyna 2000 programmable ignition
Last edited by zxrmad on Sat Jul 09, 2016 1:01 pm, edited 2 times in total.
Current bikes... '93 ZXR750R M1, '95 ZXR750 L3, '95 ZXR750 track bike, '96 Bimota sb6, '99 Bimota db4, '08 Honda VTX1800, '94 Honda CB250, '00 Honda XR200, CBR400rr race bike, '49 BSA C10 250.
User avatar
zxrmad
Warming up
Warming up
 
Posts: 57
Joined: Sun May 15, 2016 1:40 pm
Location: Mackay, Qld
Bike: ZXR750
State: Queensland

Re: ZXR750 track bike build

Postby zxrmad » Sat Jul 09, 2016 8:41 am

Image
Stock radiator which has been cut down to get more airflow into the carbon airbox

Image
Stripped down and cleaned up

Image

Image
Test fit up with the new bodywork. I've since found out from a knowledgeable member on here that this bodywork is ex Troy Bayliss 8)

Image
Nice set of period Marvic magnesium wheels. Bought these from USA

Image
The Marvics are a direct bolt on to ZXR including rotors and sprocket
Last edited by zxrmad on Sat Jul 09, 2016 2:38 pm, edited 2 times in total.
Current bikes... '93 ZXR750R M1, '95 ZXR750 L3, '95 ZXR750 track bike, '96 Bimota sb6, '99 Bimota db4, '08 Honda VTX1800, '94 Honda CB250, '00 Honda XR200, CBR400rr race bike, '49 BSA C10 250.
User avatar
zxrmad
Warming up
Warming up
 
Posts: 57
Joined: Sun May 15, 2016 1:40 pm
Location: Mackay, Qld
Bike: ZXR750
State: Queensland

Re: ZXR750 track bike build

Postby zxrmad » Sat Jul 09, 2016 8:45 am

Image
These Marvics were originally supplied by Yoshimura by the looks. 6.25" rear... hope it fits :roll:

Image

Image

Image
New carbon rear hugger from Sebimoto in Czech Republic

Image
Rebuild kits for FCR41's from USA

Image
Last edited by zxrmad on Sat Jul 09, 2016 1:11 pm, edited 2 times in total.
Current bikes... '93 ZXR750R M1, '95 ZXR750 L3, '95 ZXR750 track bike, '96 Bimota sb6, '99 Bimota db4, '08 Honda VTX1800, '94 Honda CB250, '00 Honda XR200, CBR400rr race bike, '49 BSA C10 250.
User avatar
zxrmad
Warming up
Warming up
 
Posts: 57
Joined: Sun May 15, 2016 1:40 pm
Location: Mackay, Qld
Bike: ZXR750
State: Queensland

Re: ZXR750 track bike build

Postby zxrmad » Sat Jul 09, 2016 8:50 am

Image
Rebuilding the carbs was easy enough but splitting the rack of carbs was a stressfull job. Lots of shit to go wrong here :shock:

Image

Image

Image

Image
Relocated the stock coils to the front to give more room for the airbox

Image
Last edited by zxrmad on Sat Jul 09, 2016 1:13 pm, edited 1 time in total.
Current bikes... '93 ZXR750R M1, '95 ZXR750 L3, '95 ZXR750 track bike, '96 Bimota sb6, '99 Bimota db4, '08 Honda VTX1800, '94 Honda CB250, '00 Honda XR200, CBR400rr race bike, '49 BSA C10 250.
User avatar
zxrmad
Warming up
Warming up
 
Posts: 57
Joined: Sun May 15, 2016 1:40 pm
Location: Mackay, Qld
Bike: ZXR750
State: Queensland

Re: ZXR750 track bike build

Postby zxrmad » Sat Jul 09, 2016 8:53 am

Image
New Yoshi multi temp meter. Also fittled a couple idiot lights and custom race wiring loom.

Image

Image

Image
Removed and blocked off the alternator, big weight saving here.

Image
Fitted a small carbon battery box in place of the alternator.

Image
Last edited by zxrmad on Sat Jul 09, 2016 1:16 pm, edited 1 time in total.
Current bikes... '93 ZXR750R M1, '95 ZXR750 L3, '95 ZXR750 track bike, '96 Bimota sb6, '99 Bimota db4, '08 Honda VTX1800, '94 Honda CB250, '00 Honda XR200, CBR400rr race bike, '49 BSA C10 250.
User avatar
zxrmad
Warming up
Warming up
 
Posts: 57
Joined: Sun May 15, 2016 1:40 pm
Location: Mackay, Qld
Bike: ZXR750
State: Queensland

Re: ZXR750 track bike build

Postby zxrmad » Sat Jul 09, 2016 8:57 am

Image
New titanium bolts (from UK) fitted to all of the rotors.

Image

Image
Bottom of the carbon airbox has been modified to allow the stock OEM fuel bowls to fit

Image
Lithium battery fitted, tight fit. Hope it's big enough to do the job :roll:

Image

Image
I hate this wavey rotor, but it's light and all I can find at the moment. My OCD won't allow it to stay for long. Need to find a period rotor ;)
Last edited by zxrmad on Sat Jul 09, 2016 1:22 pm, edited 1 time in total.
Current bikes... '93 ZXR750R M1, '95 ZXR750 L3, '95 ZXR750 track bike, '96 Bimota sb6, '99 Bimota db4, '08 Honda VTX1800, '94 Honda CB250, '00 Honda XR200, CBR400rr race bike, '49 BSA C10 250.
User avatar
zxrmad
Warming up
Warming up
 
Posts: 57
Joined: Sun May 15, 2016 1:40 pm
Location: Mackay, Qld
Bike: ZXR750
State: Queensland

Re: ZXR750 track bike build

Postby zxrmad » Sat Jul 09, 2016 9:00 am

Image
New Dunlop Q3 190 tyre fitted to the 6.25" Marvic only just fits

Image
Home made quick release tank mount

Image
New grips fitted

Image

Image

Image
New rearsets
Last edited by zxrmad on Sat Jul 09, 2016 2:50 pm, edited 4 times in total.
Current bikes... '93 ZXR750R M1, '95 ZXR750 L3, '95 ZXR750 track bike, '96 Bimota sb6, '99 Bimota db4, '08 Honda VTX1800, '94 Honda CB250, '00 Honda XR200, CBR400rr race bike, '49 BSA C10 250.
User avatar
zxrmad
Warming up
Warming up
 
Posts: 57
Joined: Sun May 15, 2016 1:40 pm
Location: Mackay, Qld
Bike: ZXR750
State: Queensland

Re: ZXR750 track bike build

Postby zxrmad » Sat Jul 09, 2016 9:04 am

Image

Image
Home made bracket for coolant reservoir

Image

Image

Image

Image
Last edited by zxrmad on Sat Jul 09, 2016 1:26 pm, edited 1 time in total.
Current bikes... '93 ZXR750R M1, '95 ZXR750 L3, '95 ZXR750 track bike, '96 Bimota sb6, '99 Bimota db4, '08 Honda VTX1800, '94 Honda CB250, '00 Honda XR200, CBR400rr race bike, '49 BSA C10 250.
User avatar
zxrmad
Warming up
Warming up
 
Posts: 57
Joined: Sun May 15, 2016 1:40 pm
Location: Mackay, Qld
Bike: ZXR750
State: Queensland

Re: ZXR750 track bike build

Postby zxrmad » Sat Jul 09, 2016 9:13 am

It's now 95% finished. Just need to strip and repair/ replace the clutch and replace the water pump then hopefully do a track day for a test. No doubt there will be some tuning required to get the FCR41's to work
Last edited by zxrmad on Sat Jul 09, 2016 10:14 am, edited 1 time in total.
Current bikes... '93 ZXR750R M1, '95 ZXR750 L3, '95 ZXR750 track bike, '96 Bimota sb6, '99 Bimota db4, '08 Honda VTX1800, '94 Honda CB250, '00 Honda XR200, CBR400rr race bike, '49 BSA C10 250.
User avatar
zxrmad
Warming up
Warming up
 
Posts: 57
Joined: Sun May 15, 2016 1:40 pm
Location: Mackay, Qld
Bike: ZXR750
State: Queensland

Re: ZXR750 track bike build

Postby Kwakked Up » Sat Jul 09, 2016 10:11 am

Looking great so far :kuda:
06 zx10r - road
99 zx7r - trackie
77 z1000 - project
User avatar
Kwakked Up
VIP MEMBER
VIP MEMBER
 
Posts: 580
Joined: Mon Jan 10, 2011 2:18 pm
Location: Goulburn
Bike: ZX10R
State: New South Wales

Re: ZXR750 track bike build

Postby Mister_T » Sat Jul 09, 2016 1:58 pm

Thankyou for sharing, I love seeing build pics.

One thing that I can't resist commenting on is the exhausts.

When I compare this:
Image

with this:
Image

I can't help thinking that the first exhaust is aerodynamically better than the second, because the first muffler looks like it was oriented to help fill in the low-pressure wake area right behind the bike.
User avatar
Mister_T
VIP MEMBER
VIP MEMBER
 
Posts: 205
Joined: Sat Dec 12, 2015 10:18 am
Bike: GPx750
State: Victoria

Re: ZXR750 track bike build

Postby zxrmad » Sat Jul 09, 2016 2:02 pm

Mister_T wrote:Thankyou for sharing, I love seeing build pics.

One thing that I can't resist commenting on is the exhausts.

When I compare this:
Image

with this:
Image

I can't help thinking that the first exhaust is aerodynamically better than the second, because the first muffler looks like it was oriented to help fill in the low-pressure wake area right behind the bike.


Thanks.

Yeah the exhaust is one thing that I need to fix. Not sure why but it sticks out like dogs balls! It's a Yoshi system made for the ZXR but the mid pipe looks like it's missing a bend for some reason.
Current bikes... '93 ZXR750R M1, '95 ZXR750 L3, '95 ZXR750 track bike, '96 Bimota sb6, '99 Bimota db4, '08 Honda VTX1800, '94 Honda CB250, '00 Honda XR200, CBR400rr race bike, '49 BSA C10 250.
User avatar
zxrmad
Warming up
Warming up
 
Posts: 57
Joined: Sun May 15, 2016 1:40 pm
Location: Mackay, Qld
Bike: ZXR750
State: Queensland

Re: ZXR750 track bike build

Postby Mister_T » Sat Jul 09, 2016 2:19 pm

Out of curiosity, what brand is the first exhaust? I can't quite make it out from the pic.
User avatar
Mister_T
VIP MEMBER
VIP MEMBER
 
Posts: 205
Joined: Sat Dec 12, 2015 10:18 am
Bike: GPx750
State: Victoria

Re: ZXR750 track bike build

Postby zxrmad » Sat Jul 09, 2016 2:30 pm

Mister_T wrote:Out of curiosity, what brand is the first exhaust? I can't quite make it out from the pic.


No idea. The headers are steel and very rusty. The muffler has a carbon shell but the muffler is falling apart. The headers may be OEM but there's a bsp plug at the bottom of the headers as if for an O2 sensor or something. Not sure what they would have come off
Current bikes... '93 ZXR750R M1, '95 ZXR750 L3, '95 ZXR750 track bike, '96 Bimota sb6, '99 Bimota db4, '08 Honda VTX1800, '94 Honda CB250, '00 Honda XR200, CBR400rr race bike, '49 BSA C10 250.
User avatar
zxrmad
Warming up
Warming up
 
Posts: 57
Joined: Sun May 15, 2016 1:40 pm
Location: Mackay, Qld
Bike: ZXR750
State: Queensland

Re: ZXR750 track bike build

Postby zxrmad » Sat Jul 09, 2016 2:34 pm

The Harrison Billet 6 pot callipers are quite nice period items too 8)

Image
Current bikes... '93 ZXR750R M1, '95 ZXR750 L3, '95 ZXR750 track bike, '96 Bimota sb6, '99 Bimota db4, '08 Honda VTX1800, '94 Honda CB250, '00 Honda XR200, CBR400rr race bike, '49 BSA C10 250.
User avatar
zxrmad
Warming up
Warming up
 
Posts: 57
Joined: Sun May 15, 2016 1:40 pm
Location: Mackay, Qld
Bike: ZXR750
State: Queensland

Next

Return to ZX-R Older Model Discussion

Who is online

Users browsing this forum: No registered users and 7 guests