available exhaust mods

hey guys...

incase any of you out there are wondering about what sort of modification you can do to your ninja 250 exhaust, to make it louder, cos frankly the stocky isnt very exciting, then here is a list of manufacturers:

leo vince sbk
yoshimra exhausts
two brothers racing
area p
roo racing...

the area p seems loud, as well as the two brothers, while the yoshimura with baffle in is noticably quieter...

here are pics of the yoshimura and two brothers...

Attachments

two brothers can

IMGP0011.JPG (217.88 KiB) Viewed 10784 times

yoshimura can

IMGP0012.JPG (213.96 KiB) Viewed 10782 times

I hope you've removed that reflector Owen..

im still a proud reflector boy.... cbf to take it off...

There's also now a Micron slipon out. Between 500 and 650 USD, titanium and stainless.

any options for the zzr250? apart from tapping a hole in it with a screw driver and a hammer?

Bodgey as but you can cut them off at the last plate, where they start to rust anyway, which is why it was done on exes bike.

any options for the zzr250? apart from tapping a hole in it with a screw driver and a hammer?

a member on another forum has found a 2-1 zorst for her ZZR... ill chase her up for the details sometime soon and get back to you...

i was looking for a micron or akra when i was shopping for mine, but they hadnt released any yet.... will go and have a look at the micron now... ...

http://www.micronexhausts.com/product-details.html?autoid=79

looks not too bad aye....

If you or anyone else can find info on, or has, a zzr 250 zorst, please post up.
We are "restoring" one for the misses atm...

I made one for the Zipper, I'll whack up a pic when the phone & pc start talking to each other again Dave.

Do these Ninja 250's have the KLEEN system on em..??

Its a clean air injection system to reduce exhaust gases. Goes from the air box to the exhaust valve in the rocker cover..

Removal of which, on bigger bikes anyway, helps reduce the backfiring when an aftermarket pipe is fitted....

hey dave and owen,

here is a foto of the zzr with 2-1 exhaust



it was originally one of those mauve and puprle ZZRs however the lovely owner decided to match the colour of her bike to her car, and just for a bit of spice decided that gold rims and forks would set it of... i think it looks pretty spiffy...

anywho, about the exhaust...

she thinks its a backyard special, she bought it at the wreckers for $100 and it had come off another ZZR... she said some of the welding didnt look the neatest but she did like the fact it was a 2-1... it has no brand markings on the can at all and this is the other reason she thinks it was a backyard special...

cheers guys

Looks like a Formula 1 can to me. I'm pretty sure they made a 2-1 system for the GPX/ZZR.

They did indeed, and you're right, there is a striking resembelence. And aside from the sticker on the can, i don't recollect any stampings of any sort on the system i got for my GPX750.

cool, thanks for the info guys.
I did find a 2-1 system for the gpx and zzr, however at $800, unless you are going to keep the bike for a long time, it hardly seems worth it

Dave you may be interested in this if you are going to keep it for a while.

http://www.zpower.com.au/catalog/index.php/cPath/1557

If i could pick up a 2-1 for $100 i would throw it on in a heartbeat however