Hey all, new Kawasaki owner.
Recently bought a 2012 ZX10R race bike.
It's been flashed with Woolich, air filter, full exhaust, Translogic quickshifter and altered gearing (15F, 40R) and tyre sizes 120/70 and 190/55.
Rode it once, had the TC lights all flashing before the end of lap one on the first track day out
Got home and found the ABS loom (black plug with connecting lever) wasn't connected properly, so I put it in properly.
Was loading it up for another run tomorrow (hoping the ABS plug sorted it out, had it on the rear stand in gear running it just to see if anything would flash....)
And it's still coming up with the codes as follows;
11 - MAIN THROTTLE SENSOR
12 - INTAKE AIR PRESSURE SENSOR 1
16 - INTAKE AIR PRESSURE SENSOR 2
31 - VEHICLE DOWN SENSOR
32 - SUBTHROTTLE SENSOR
b58 - C.A.N COMMUNICATION (RECEPTION) MONITOR INSPECTION
And all the traction control lights flashing.
Would spinning the rear wheel on the stand (bike stationary) cause those codes? Or is there a bigger issue at hand?
Any insight much appreciated.