I’ve been considering purchasing a ZX 6R. My current bikes seat height is 760mm. I was considering lower the rear suspension on the ZX 6R to about 780mm, bringing the seat height down.
Just wondering if any body has done this and if so how did you find the ride…
the reason i asked is the later zx6's have a spacer in the rear shock assembly, it lowers the bike a reasonable amount. But the trade off is that the bike is more upright on the stand and you will have to be careful with it.
But apart from that what Neka said is correct, do a search and you will find
...you can get the stand chopped and shortened so the bike leans at a normal angle. Alas this makes it hard to sell to a normal height rider, but thems the breaks.
If I was doing this (and seeing I am a shortarse I will probably will have to eventually) I'd buy a second-hand side-stand from a wrecker and operate on that...and keep the original as a spare.
I Think you'll struggle Princess. Kev's 05 12r is easier for me to move (both on & off the bike) then his Miss's Kerry 06 ZX6R. My 02 9R is 20mm lower then both after i removed the rear spacer.
The 600 sports bikes all seem higher at the seat then the Litre bikes. It's related to making them Narrower then they were 5 years ago.
"Nan & Pop Racing"
Poppy Hops on .... CBR150 (Superlite) CBR954 "Blade"
Nanna Naps on .... MoriWAKI NSR85 (Motolite) ZX10R "Crim"
We may ride like Old Can'ts, But Phuk we look DOOG !!!!!!
I Think you'll struggle Princess. Kev's 05 12r is easier for me to move (both on & off the bike) then his Miss's Kerry 06 ZX6R. My 02 9R is 20mm lower then both after i removed the rear spacer.
The 600 sports bikes all seem higher at the seat then the Litre bikes. It's related to making them Narrower then they were 5 years ago.
simple...get a 5 yr old 600....or a litre bike...u ridden a 10 yet?
