which clutch company?

For general Technical and Performance Discussions
Post Reply

Which Clutch Company?

Goodridge
0
No votes
EBC
5
100%
 
Total votes: 5

WRT_GPX
KSRC Member
KSRC Member
Posts: 380
Joined: Tue Jul 25, 2006 9:24 pm
Location: Campbelltown, NSW.

which clutch company?

Post by WRT_GPX »

Ok, after getting some quotes for clutch kits, i have found 2 kits avaliable that suit my needs

1. EBC fibre plates and springs, 100 dollars pick up close to me

2. Goodridge plates and springs for 113 including delivery.

which would you suggest, i havent had any experience with either company so im not sure which to choose. i was heading towards EBC just because theyre near me and i can pay in person.
Image
User avatar
Gosling1
Team Donut
Team Donut
Posts: 13826
Joined: Mon Jun 20, 2005 9:30 pm
Bike: ZX2R
State: New South Wales
Location: Anarchy Road
Contact:

Post by Gosling1 »

either one will do the job fine, they are probably both sourced from the same manufacturer anyway...

the correct answer is actually 'Barnett', not sure if they make a kit for your bike.

8)
".....shut the gate on this one Maxie......it's the ducks guts !!............."
User avatar
Smitty
VIP MEMBER
VIP MEMBER
Posts: 10912
Joined: Wed Apr 21, 2004 1:59 pm
Bike: ZX12R
State: Victoria
Location: 3rd rock from the Sun
Contact:

Post by Smitty »

either have a good rep
although lots here tend towards the Goodridge...
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
Posts: 10912
Joined: Wed Apr 21, 2004 1:59 pm
Bike: ZX12R
State: Victoria
Location: 3rd rock from the Sun
Contact:

Post by Smitty »

either one will do the job fine, they are probably both sourced from the same manufacturer anyway...

the correct answer is actually 'Barnett', not sure if they make a kit for your bike.

Cool
_________________
"...You're blaspheming....I don't have to work with a blasphemer....."

ZX12R - WARNING - Heavy Fines - Loss of Licence
fark me Dave
where you spring from..??? :D
whats with the ZX12r warning? someone been a bit norty? :wink:

cheers
GOTTA LUV the 12R!!
User avatar
Gosling1
Team Donut
Team Donut
Posts: 13826
Joined: Mon Jun 20, 2005 9:30 pm
Bike: ZX2R
State: New South Wales
Location: Anarchy Road
Contact:

Post by Gosling1 »

Hi Ian

I will be in and out like a honeymoon dick over the next few months......been busy building bikes, got one to finish off in the next 4 weeks, wait till some photos of *that* baby hit the site :shock: :shock: :twisted:

no speedin' fines recently, have been very quite. Knock on wood......

8)
".....shut the gate on this one Maxie......it's the ducks guts !!............."
User avatar
Duane
KSRC Addict
KSRC Addict
Posts: 3011
Joined: Mon Jul 26, 2004 9:15 am
Bike: Z1000
State: Victoria
Location: VIC

Post by Duane »

Gosling1 wrote: no speedin' fines recently, have been very quite. Knock on wood......
I didnt think anyone who rides a 12 gets speeding fines, its just when they get pulled over for routine licence checks, they see their age and tell them to go home and spend time with their great grandchildren and rip up their licence.... old bastards
www.bromancer.com.au
WRT_GPX
KSRC Member
KSRC Member
Posts: 380
Joined: Tue Jul 25, 2006 9:24 pm
Location: Campbelltown, NSW.

Post by WRT_GPX »

barnett do make a clutch kit for my bike, but its alot more expensive, about 160 dollars compared to the 100 flat for an EBC
Image
FrogZ
KSRC Contributor
KSRC Contributor
Posts: 2090
Joined: Tue Apr 11, 2006 12:58 pm
Location: Rockhampton CQ

Post by FrogZ »

STC slipper from Italy... unfortuantely they dont make one for the 12 :cry:
Just because you CAN ride, doesn't mean you SHOULD
Post Reply