Air Compressor-And NO I don't mean a Harley!

For general Technical and Performance Discussions
User avatar
Strika
VIP MEMBER
VIP MEMBER
Posts: 8373
Joined: Tue Feb 01, 2005 8:02 am
Bike: Yamaha
State: Victoria
Location: Melbourne

Air Compressor-And NO I don't mean a Harley!

Post by Strika »

I had lunch with a mate today, which unfortunately was my shout. However, it worked out well in the end. The course of conversation at the end of lunch got to what you were doing next. I mentioned I was going to have a sniff around for an Air compressor. He said not to be silly, as he had three or four that he didn't use, one of which is not large enough for his construction jobs and will never use. So he gave it to me along with some hose and a spray kit all of which was spankers apart from a thick layer of dust! It's only a little compressor 2.0hp 21Litres, but it's enough to run the air glower, pump and a Rattle gun so it's enough for me.

All I need now is a Rattle gun. Anyone got one for sale? :lol:

So now, the all I need is a gennie, welder, drill press and a lathe and I'll be happy! :lol:
"I hate to advocate drugs, alcohol, violence or insanity to anyone, but they've always worked for me" Hunter S. Thompson.
There are really only two questions in life. 1.Which way do i go? 2.What is the lap record?
User avatar
MadKaw
Administrator
Administrator
Posts: 9671
Joined: Tue Apr 20, 2004 4:33 pm
Bike: ZX10R
State: New South Wales
Location: Windsor or the Creek..
Contact:

Post by MadKaw »

I've got a 2hp 24 litre compressor, and I also have a rattle gun. As long as your only using it for undoing stuff you can by hand, its fine. Don't think its gunna get the front sprocket nut off...
Great for changing the rear sprocket or any other place that has lots of bolts....

There ok for spraying, we did the number surrounds on mine and Greenbloods 7 with my little compressor. The problem is they get a bit of moisture in them and it gets into the paint. Fine for a tracky but not that show bike you may want to build....

Supa cheap auto is your friend. They do a kit with a rattle gun and a heap of other stuff for about $100 during there regular sales (usually $159 or something)..
Dave
2010 Z1000
ex bikes
05 ZX-10R Race Bike - No.77
95 ZXR750R M Race Bike - No. 75
98 ZX9R Race Bike - No. 000
zx6r, zx7r, GPX750, GPX500, lots of KX's.
Image
I ride way too fast to worry about cholesterol
User avatar
Burky
VIP MEMBER
VIP MEMBER
Posts: 1646
Joined: Fri Apr 14, 2006 12:20 am
Bike: ZX10R
State: New South Wales
Location: NSW Padstow

Post by Burky »

The problem is they get a bit of moisture in them and it gets into the paint.
You can get the seperator from super cheap, aparently thay are quite good :wink:
"I live in my own little world. But it's OK. They know me here"
User avatar
mike-s
Apprentice Post Whore :-)
Apprentice Post Whore :-)
Posts: 6142
Joined: Sat Aug 07, 2004 5:43 am
Bike: Suzuki
State: New South Wales
Location: Arncliffe, Sydney
Contact:

Post by mike-s »

go to bunnings, saw rattle guns going for about $25-45 a month or so ago.
Image
If it hurts, you aren't doing it right.
User avatar
Nanna10r
Team Ninja
Posts: 4291
Joined: Wed Jul 14, 2004 10:42 pm
Bike: ZX10R
State: Queensland
Location: Brisbane Australia

Post by Nanna10r »

Litres hhhmmph ya Pussies, HTFU mine is measured in FEET.
Got me a Puma in line twin 14 foot unit. Bloody useful bit of gear too.
"Nan & Pop Racing"
Poppy Hops on .... CBR150 (Superlite) CBR954 "Blade"
Nanna Naps on .... MoriWAKI NSR85 (Motolite) ZX10R "Crim"
We may ride like Old Can'ts, But Phuk we look DOOG !!!!!!
mrmina
Apprentice Post Whore :-)
Apprentice Post Whore :-)
Posts: 7039
Joined: Wed Apr 21, 2004 8:11 pm
Location: Sydenham, Victoria

Post by mrmina »

strika,

dave is right, if u need to do rough nuts like sprockets, forks etc u need a min of 2.5hp and a 40L tank.

However, u can get rattle guns that run on the small compressors that give u a bit more bite.
[url]www.rmsmg.com.au
User avatar
Strika
VIP MEMBER
VIP MEMBER
Posts: 8373
Joined: Tue Feb 01, 2005 8:02 am
Bike: Yamaha
State: Victoria
Location: Melbourne

Post by Strika »

mrmina wrote:strika,

dave is right, if u need to do rough nuts like sprockets, forks etc u need a min of 2.5hp and a 40L tank.

However, u can get rattle guns that run on the small compressors that give u a bit more bite.
I will probably buy a rattle gun which is way too rugged for the compressor to handle, then I will have no choice but to go buy a decent compressor to go with it! :lol: And then I may as well get that Genset to run them all with at the tracks where they run out of power outlets, like Broadford and Winton! :wink:
"I hate to advocate drugs, alcohol, violence or insanity to anyone, but they've always worked for me" Hunter S. Thompson.
There are really only two questions in life. 1.Which way do i go? 2.What is the lap record?
Felix
KSRC Contributor
KSRC Contributor
Posts: 1173
Joined: Thu Sep 02, 2004 1:54 am
Bike: Suzuki
State: Overseas
Location: Osaka

Post by Felix »

Why don't you just buy a petrol powered compressor then?
- Team Furball -

Image
User avatar
Neka79
Extreme Post Whore :-)
Extreme Post Whore :-)
Posts: 13115
Joined: Fri Apr 23, 2004 12:20 am
Bike: Z900
State: South Australia
Location: Adelaide......nah its cool..no really!!
Contact:

Post by Neka79 »

Felix wrote:Why don't you just buy a petrol powered compressor then?
or a petrol powered generator to run the compressor...and all ur other toys?? lol
Neka
2006 Zeddy 1000
1996 VS series 2 S pak Ute
Image
Felix
KSRC Contributor
KSRC Contributor
Posts: 1173
Joined: Thu Sep 02, 2004 1:54 am
Bike: Suzuki
State: Overseas
Location: Osaka

Post by Felix »

Mate we all know your toys run on batteries :)
- Team Furball -

Image
User avatar
Strika
VIP MEMBER
VIP MEMBER
Posts: 8373
Joined: Tue Feb 01, 2005 8:02 am
Bike: Yamaha
State: Victoria
Location: Melbourne

Post by Strika »

Felix wrote:Why don't you just buy a petrol powered compressor then?
Cause it is a biatch to run it in the shed at home or work then. Much rather have an electrically powered one for home/work, and use the gennie at those race meets where they run out o power. :)
"I hate to advocate drugs, alcohol, violence or insanity to anyone, but they've always worked for me" Hunter S. Thompson.
There are really only two questions in life. 1.Which way do i go? 2.What is the lap record?
balanse
KSRC Member
KSRC Member
Posts: 473
Joined: Fri Mar 11, 2005 8:31 pm
Location: Rosanna, Victoria

Post by balanse »

Air compressors blow :!:
Just one more law and everyone will be safe.
Image
Felix
KSRC Contributor
KSRC Contributor
Posts: 1173
Joined: Thu Sep 02, 2004 1:54 am
Bike: Suzuki
State: Overseas
Location: Osaka

Post by Felix »

Strika wrote:Cause it is a biatch to run it in the shed at home or work then...
Fair enough then...I suppose a genny is always handy for blackout season as well...

We had a Honda genset years ago when dad built our shed on a very rural block - based on that, I wouldn't buy anything else. The outlaws have a couple of the small Honda gensets for the beach house/caravan, and they are equally as good. Honda isn't always a dirty word :)
- Team Furball -

Image
mrmina
Apprentice Post Whore :-)
Apprentice Post Whore :-)
Posts: 7039
Joined: Wed Apr 21, 2004 8:11 pm
Location: Sydenham, Victoria

Post by mrmina »

Strika wrote:
mrmina wrote:strika,

dave is right, if u need to do rough nuts like sprockets, forks etc u need a min of 2.5hp and a 40L tank.

However, u can get rattle guns that run on the small compressors that give u a bit more bite.
I will probably buy a rattle gun which is way too rugged for the compressor to handle, then I will have no choice but to go buy a decent compressor to go with it! :lol: And then I may as well get that Genset to run them all with at the tracks where they run out of power outlets, like Broadford and Winton! :wink:
thats all good, ur garage will be full of air tools in no time.

mate have a chat with the guys at bunnings/supercheap and they'll let u know which gun to buy. From memory it had a 2HP rating on the box.

I can get u a 1MVA genset cheap. then u wont complain about running out of power. :twisted:

look what i found strika. Maybe u can tow this to ur track days.

http://www.sinetech.co.za/gen2.htm
[url]www.rmsmg.com.au
User avatar
Strika
VIP MEMBER
VIP MEMBER
Posts: 8373
Joined: Tue Feb 01, 2005 8:02 am
Bike: Yamaha
State: Victoria
Location: Melbourne

Post by Strika »

mrmina wrote:
Strika wrote:
mrmina wrote:strika,

dave is right, if u need to do rough nuts like sprockets, forks etc u need a min of 2.5hp and a 40L tank.

However, u can get rattle guns that run on the small compressors that give u a bit more bite.
I will probably buy a rattle gun which is way too rugged for the compressor to handle, then I will have no choice but to go buy a decent compressor to go with it! :lol: And then I may as well get that Genset to run them all with at the tracks where they run out of power outlets, like Broadford and Winton! :wink:
thats all good, ur garage will be full of air tools in no time.

mate have a chat with the guys at bunnings/supercheap and they'll let u know which gun to buy. From memory it had a 2HP rating on the box.

I can get u a 1MVA genset cheap. then u wont complain about running out of power. :twisted:

look what i found strika. Maybe u can tow this to ur track days.

http://www.sinetech.co.za/gen2.htm
Faaark!! You could even run your anal intruder on that gennie mate! :lol:
"I hate to advocate drugs, alcohol, violence or insanity to anyone, but they've always worked for me" Hunter S. Thompson.
There are really only two questions in life. 1.Which way do i go? 2.What is the lap record?
Post Reply