Gears

For general Technical and Performance Discussions
Post Reply
oldie
Newbie
Posts: 3
Joined: Sat Jul 27, 2013 4:56 pm
Bike: Other Kawi
State: Western Australia

Gears

Post by oldie »

I have just bought a zx10 powered speedway sidecar with blown 2nd gear,Everything i can find on it is 38 tooth on output and 19 on input shaft. What i have in the bike is 1 tooth less on each gear.ie 37 and 18. Beats me. any help would be awesome
Top
User avatar
Wattie
VIP MEMBER
VIP MEMBER
Posts: 10041
Joined: Mon Oct 31, 2005 12:23 pm
Bike: ZX10R
State: New South Wales
Location: Bligh Park

Re: Gears

Post by Wattie »

What year model zx10?
Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
Top
oldie
Newbie
Posts: 3
Joined: Sat Jul 27, 2013 4:56 pm
Bike: Other Kawi
State: Western Australia

Re: Gears

Post by oldie »

Pretty sure its a 1989 model. engine no ZX100AE038523
Top
User avatar
Gosling1
Team Donut
Team Donut
Posts: 13826
Joined: Mon Jun 20, 2005 9:30 pm
Bike: ZX2R
State: New South Wales
Location: Anarchy Road
Contact:
Contact Gosling1

Re: Gears

Post by Gosling1 »

that's an early ZX10 motor. You should be able to fit a 2nd gear from the later ZZR-1100 motors without any problems - or perhaps even a complete transmission, it would be easier to swap the whole lot out in one go.......

8)
".....shut the gate on this one Maxie......it's the ducks guts !!............."
Top
oldie
Newbie
Posts: 3
Joined: Sat Jul 27, 2013 4:56 pm
Bike: Other Kawi
State: Western Australia

Re: Gears

Post by oldie »

Cheers,i will look into it
Top
Post Reply

Return to “General Tech & Performance Talk”