Page 2 of 2
Posted: Wed Aug 03, 2005 2:54 pm
by Jonno
(thinking of a shite stir that includes LRP and sprokets)
Posted: Wed Aug 03, 2005 3:41 pm
by mike-s
Mick C wrote:...my old 9 and the 10 both have a 27mm for the rear wheel nut, so my money would be on your one being the same.
Also to add, my EL250, LTD450 & my GPX750 *ALL* have/had a 27mm socket on the rear. So i think it's pretty safe to guess yours does too.
Posted: Sat Aug 06, 2005 10:47 am
by Jonno
mike-s wrote:Mick C wrote:...my old 9 and the 10 both have a 27mm for the rear wheel nut, so my money would be on your one being the same.
Also to add, my EL250, LTD450 & my GPX750 *ALL* have/had a 27mm socket on the rear. So i think it's pretty safe to guess yours does too.
Nope not 27mm..
Measured it for him and it is 32mm or 1.1/4" with my vernier, in fact everyones bikes all Ninja's on thursdays ride except Rusty's ZZR600 were 32mm with a hollow axle bolt (Dia'24mm bolt with a M24x1.75mm thread). The ZZR has the 27mm nut and a solid axle bolt, was the same 27mm nut on my old ZZR1200 I think.
Also Mick, that seems strange your old 9 had a 27mm nut when Pontikats although being the last model 9r produced has a 32mm nut, are you sure mate about the 10 as well?
I would like to say ALL Ninja's were created with a 32mm nut, and all ZZR and GPX had a 27mm nut, handy info if it were true.
