Page 3 of 3
Re: bike cuts out anything over 80kph
Posted: Thu Oct 23, 2008 9:31 pm
by gazza2008au
according to the service manual for the standard chain type i have the DID 520v2 with 110 link, the slack should be around 7-15 mm this is the service manual of the site in "gen tech talk"
also says "too tight more then 15 mm, too loose less then 7 mm"
wow... my chain was alot looser than that and i didnt have any problems no chain slap at all
Re: bike cuts out anything over 80kph
Posted: Fri Oct 24, 2008 1:13 pm
by corvus2606
my gpx had about 70 to 80 mm free play

turns out it was contacting my centre stand, which had been bent in by the previous owner
I had it tightened, coz i wasnt game to try it myself(second week with the bike)
now have to replace the chain, sprockets, and centre stand.
irritated with myself that i didnt notice this when i bought the bike, but lesson learned
Re: bike cuts out anything over 80kph
Posted: Fri Oct 24, 2008 4:27 pm
by fadz90
70- 80 mm play

wow im suprised the thing didnt fling off..
and no it doesn't say weither someone is sitting on it or the bike at rest. so im not sure
Re: bike cuts out anything over 80kph
Posted: Fri Oct 24, 2008 10:37 pm
by gazza2008au
i doubt it would be with someone sitting on the bike that would take two mechanics
