Page 3 of 4
Re: Sun 18th Jan. Hands on technical session *VIC*
Posted: Sat Jan 17, 2009 4:47 pm
by Slow and wobbly
Looks good. I cant believe the Vic crew has managed to get so organised with only 2 weeks notice!
To those that have offered, thank you. I think I have everything covered. Been to the grog shop and have both boys and girls beers plus lolly water. Been to the butcher and should have ample. Salad for the herbivores. Been to Autobarn and stocked up on some consumables. Cleaned the garage out. Written up my class notes. Responded to numerous SMS and phone calls. Should be a good day. Those that don't already have my address then PM me tonight or have a go on 0408 378 708.
So far I think the list is - and this is off the top of my head.
Mick Dundee
Photomike
Stereo
Benno
Sunshine
Dutchawhatsit
ZX6rider
Kwakaddict (dependant on hangover)
Craig
Hoffy - will be there in spirit. A plate of scones shall be placed out in honour.
Anyone else contemplating then by all means come on out. Weather will be good.
9am tomorrow
Adrian.
Re: Sun 18th Jan. Hands on technical session *VIC*
Posted: Sat Jan 17, 2009 8:52 pm
by Slow and wobbly
Rossi?
Tape?
Smitty?
Mario?
Stace?
MIG?
I was hoping to draw at least one of out of the deck.
Re: Sun 18th Jan. Hands on technical session *VIC*
Posted: Sat Jan 17, 2009 9:51 pm
by Stereo
Slow and wobbly wrote:Rossi?
Tape?
Smitty?
Mario?
Stace?
MIG?
I was hoping to draw at least one of out of the deck.
Rossi? (has forgotten everything about maintaining a ZX9)
Tape? (has children, which are apparently more important... phuff)
Smitty? (Walking frame doesnt allow quick movement)
Mario? (who?)
Stace? (Walked past an electro magnet is now permanently living about 30 feet off the ground at a wreckers)
Re: Sun 18th Jan. Hands on technical session *VIC*
Posted: Sun Jan 18, 2009 2:37 pm
by craig
thanks for the hospitality S/W, and nice to put some faces to the names i've forgotten already and can't match to avatars. Was a pleasant day watching and eventually getting a little grime on my hands...... Dave he even washed your bike ...was that your main tutorial
Re: Sun 18th Jan. Hands on technical session *VIC*
Posted: Sun Jan 18, 2009 3:47 pm
by photomike666
Thanks to all who turned up, to Mick for donating his bike and especially to Adrian for hosting the event with too many snags and beers. Was a good day and Micks wheels are blue

I'll post picks later.
Big thanks to Benno for letting me have a spin on his R1 too.
Re: Sun 18th Jan. Hands on technical session *VIC*
Posted: Sun Jan 18, 2009 5:14 pm
by dutchy
photomike666 wrote:Thanks to all who turned up, to Mick for donating his bike and especially to Adrian for hosting the event with too many snags and beers. Was a good day and Micks wheels are blue

I'll post picks later.
Big thanks to Benno for letting me have a spin on his R1 too.
+1 good to finally meet up with people, hope to see everyone more often. forgot to remind mickdundee maybe he should check that tailight switch i adjusted. (should be ok?!

)
Re: Sun 18th Jan. Hands on technical session *VIC*
Posted: Sun Jan 18, 2009 7:34 pm
by zx6rider
Thanks Adrian for a very informative day, great effort for putting this all together even if I did stand back and let the professionals do all the work

, even though I tried to be as observant as possible! and thanks to Mick Dundee for supplying the test bike, who's wheels I thought were black!!!
Great to meet everyone as well

Re: Sun 18th Jan. Hands on technical session *VIC*
Posted: Sun Jan 18, 2009 7:37 pm
by sunshine
yeah 2nd that mike
thankx for the hospitality adrian muchly appreaciated
as was the the snags and beers
it was a top way to spend a sunday !!!
talking shite and fixing bikes
and i think i even remembered some of the those tips
maybe we could venture on to the wild side and actualy organise a ride
althouh we should crawl before we walk eh
c ya all next time
mick
Re: Sun 18th Jan. Hands on technical session *VIC*
Posted: Sun Jan 18, 2009 7:47 pm
by Smitty
Stereo wrote:
Smitty? (Walking frame doesnt allow quick movement)
who spent the day trying to get MORE hp outta a race engine

Re: Sun 18th Jan. Hands on technical session *VIC*
Posted: Sun Jan 18, 2009 8:09 pm
by dave#3
Smitty wrote:Stereo wrote:
Smitty? (Walking frame doesnt allow quick movement)
who spent the day trying to get MORE hp outta a race engine

2 wheels good, 4 wheels bad
Glad to hear you guys had a good day.
Re: Sun 18th Jan. Hands on technical session *VIC*
Posted: Sun Jan 18, 2009 8:12 pm
by the kid
Good work Wobbles , sounds like things went well .
Got a bit too caught up in TA/RD sorting for next weekend . See ya there

Re: Sun 18th Jan. Hands on technical session *VIC*
Posted: Mon Jan 19, 2009 6:24 am
by mick_dundee
Stereo wrote:Slow and wobbly wrote:Rossi?
Tape?
Smitty?
Mario?
Stace?
MIG?
I was hoping to draw at least one of out of the deck.
Rossi? (has forgotten everything about maintaining
(and riding even) a ZX9)
Tape? (has children, which are apparently more important... phuff)
Smitty? (Walking frame doesnt allow quick movement)
Mario? (who?)
Stace? (Walked past an electro magnet is now permanently living about 30 feet off the ground at a wreckers)
Thanks wobbles, was a good day, some handy tips wre shared, beer and snags were good, there was even a salad and cutlery ffs (not that either got touched...) job well done I reckon.
Re: Sun 18th Jan. Hands on technical session *VIC*
Posted: Mon Jan 19, 2009 7:01 am
by craig
don't need a memory with these fandangle machines....i'll just read thru the posts and you'll all appear thanks again to S/W and others for a pleasant day
Re: Sun 18th Jan. Hands on technical session *VIC*
Posted: Mon Jan 19, 2009 12:28 pm
by Stereo
Thanks Wobbly, wicked stuff.
I learned a lot.
For those of you not able to attend, we had a good time taking various bits off'f mic's bike and putting them back on again. I do believe I actually learned something. On top of giving away his expertise for free he also provided a barbeque and free beer! it was like I was dreaming
Here are some pics of the event...
Re: Sun 18th Jan. Hands on technical session *VIC*
Posted: Mon Jan 19, 2009 2:50 pm
by Benno
Yeah, great day out. Even for the general chit chat. Thanks Adrian for the day, we should do things like this more often!