Re: next spanner day?
Posted: Mon Mar 30, 2009 7:35 pm
OK what is YAK FAT?..... 
Kawasaki Sportsbike Riders Club - Australia - Online Forum
Australian Kawasaki Sportsbike Riders Discussion Forum - All Welcome, free and easy to join, just click "register" below - www.ksrc-au.com
https://ksrc-au.com/phpBB3/
next spanner day?
Page 3 of 3
Re: next spanner day?
Posted: Mon Mar 30, 2009 7:36 pm
All will be revealed
Re: next spanner day?
Posted: Tue Mar 31, 2009 2:48 am
MadKaw wrote:Will need (additional to usual tools) -
Rattle Gun
Long Socket
Grinder
2 hammers - or a hammer and a mallet... unless someone has a proper chain tool.. (the $10 MAW one Hoffy bought is useless, we went back to hammers.. )
Extension lead
Rob, Can you bring or will I..?
......plus....
Circular Saw
Jack Hammer
Jaws of Life
Espresso Machine
Re: next spanner day?
Posted: Thu Apr 02, 2009 4:39 pm
Look's like a no go guy's 
....
Got the call to come pick them up today and they were the wrong ones(for a '05 636 15/46
DOUBLE wrong).....Lucky I got them to double check that my chain would fit......
Will have to wait 4 week's apparently to get a 15 front and 43 cat5 rear:? .......
Will still come out and have a look on saturday
....Got the call to come pick them up today and they were the wrong ones(for a '05 636 15/46
DOUBLE wrong).....Lucky I got them to double check that my chain would fit......Will have to wait 4 week's apparently to get a 15 front and 43 cat5 rear:? .......
Will still come out and have a look on saturday
Re: next spanner day?
Posted: Thu Apr 02, 2009 4:41 pm
fark dude, were u doing it thru aitkens??
bummer about the wait, as it turns out, i need spanner day part 2
bummer about the wait, as it turns out, i need spanner day part 2
Re: next spanner day?
Posted: Thu Apr 02, 2009 4:43 pm
Yeah but they get thru Mladin's....Six Addict wrote:fark dude, were u doing it thru aitkens??
bummer about the wait, as it turns out, i need spanner day part 2
What's your second spanner day for?
Re: next spanner day?
Posted: Thu Apr 02, 2009 4:56 pm
went round to rob's last night to do indicators and spark plugs, but wasnt able to get the plugs out due to clearance issues with the frame, but this will all be solved if i get the right tool
Re: next spanner day?
Posted: Thu Apr 02, 2009 5:30 pm
and the tool is???
Re: next spanner day?
Posted: Thu Apr 02, 2009 5:46 pm
well its a special extension for spark plugs but it needs to be a certain length, and narrow... robracer had a narrow one, but it was too long, maybe 60-70mm too long
Re: next spanner day?
Posted: Thu Apr 02, 2009 6:34 pm
doesnt your toolkit have that in it??
my 10 and the zeddy had a sparkplug tool in the kit that bends in the middle so you can get it past the frame.
my 10 and the zeddy had a sparkplug tool in the kit that bends in the middle so you can get it past the frame.
Re: next spanner day?
Posted: Thu Apr 02, 2009 6:52 pm
Guys this is a crappy plug position & I have never come across this before, the two outer plugs sit real close to the frame & as Owen said the only extension I have is too long, Wattie the plugs are buried 150 mm deep to the tip similar to the 750 but in a shite position 
similar to the 750 but in a shite position Re: next spanner day?
Posted: Thu Apr 02, 2009 7:59 pm
Has any body bought the vortex sprogget's from OS?Might be quicker I'm a thinkin .....
.....