2006 ZX10R brake question *Brakes Fixed!!*

[Blurr]

post up in the for sale section. They will sell soon enough.

Dont happen to have a spare brembo laying around do you?

[ZX-10R_04]

Nah sorry dont have spare Brembo only the original 04 ZX10R master cylinder & the Radial 05 ZX6R one ... The Brembo RCS 19 one is on my ZX10R & staying on it lol

[Mad RS]

Hey,
I just finished fitting my new set of Nissin calipers. Everything went real smooth and they bled up great. Absolute night and day compared to the old stock brakes.......but I have 1 issue.

I took the bike out to be in the new pads and test the callipers. 60kph nice and firm. 80kph still feel great and really pull the bike up well. 100kph OMG the death shudder. I thought the callipers had come loose. I checked the bike over and no issues. Start again. The shudder comes on a 105kph and stops at 90kph. Took the bike right up to 200kph (closed road) and the felt great until 105kph and shudder stopped again at 90kph.

What can this be???? A warped disc would give a constant shdder, right?? Lines have no air. Got me stumped. Could it be the discs???

Any ideas???

[Wattie]

sounds like discs...

as you said they are not loose, dont know how a caliper could make them shudder...

[fireyrob]

Could be completely off the mark but are your forks bottoming out?

[Mad RS]

I had a think about that today so I'm going to try the old zip tie trick and see. Just seems weird that from 200kph to 105kph is fine and strong braking and from 90kph to stop is perfect aswell. It's just that 15kph zone that is the issue.

I was told that it may be a seized disc rivet?? How do I check they arn't seized??

[Mad RS]

Bike is fixed. I am soo relieved. Just need to bed in the new pads and discs and I should be sweet.