Aj's zxr250a project

ZX2R, ZXR400, ZXR750, ZX6R, ZX7R, ZX9R & ZX12R & others.
ajverma
Warming up
Warming up
Posts: 98
Joined: Wed Jul 13, 2011 6:26 pm
Bike: ZXR750
State: New South Wales

Re: Aj's zxr250a project

Post by ajverma »

the kid wrote:What are those Madass like to ride AJ ?
Always liked them and think they should be more popular than scooters .
They look like a great commuter .

exactly as you say it is, they're such a great little toy to get to and fro, and very comfortable too, it wouldn't like the highway, but the engine has a lot of upgrade potential, there's a website that sells a power up kit (big bore,intake and exhaust derestriction, and minor electrical mods) that takes power from 8hp to 25hp, supposedly seeing 143km/h on a dyno.... I reckon that would be awesome.

I'm going to buy another one eventually and use it to and from the station, for $800, I think it's a great bike

p.s. it's also very torquey, pulling wheelies off the clutch is very easy, and the brakes are great, suspension is very well set up
User avatar
the kid
KSRC Addict
KSRC Addict
Posts: 3948
Joined: Thu May 12, 2005 5:10 pm
Bike: Yamaha
State: Victoria
Location: Bendigo

Re: Aj's zxr250a project

Post by the kid »

Thanks
$800 :shock: too cheap !!
Ummmm let me see
ajverma
Warming up
Warming up
Posts: 98
Joined: Wed Jul 13, 2011 6:26 pm
Bike: ZXR750
State: New South Wales

Re: Aj's zxr250a project

Post by ajverma »

Well I was reading a magazine about a guy who built a whole bike with a 500cc v8, I was very curious, and when I saw that engine, I was so excited. Can you guys guess the engine?

Image
User avatar
born green
KSRC Contributor
KSRC Contributor
Posts: 1491
Joined: Sun Aug 07, 2011 6:59 am
Bike: ZX10R
State: Victoria
Location: blind bight vic

Re: Aj's zxr250a project

Post by born green »

Ok, i give up?? its not ian drysdale v8 yamaha, dont kno where the photo is from, cant place it, its not at moorabin... do tell?
96 ZX7R roady
07 ZX10R tracky. to many mods to list here!
95 tickford XR6,
SO MANY KAWASAKI'S SO LITTLE TIME
User avatar
vanrootn
KSRC Member
KSRC Member
Posts: 408
Joined: Thu Oct 01, 2009 8:40 pm
Bike: Z1000
State: South Australia
Location: Adelaide, SA

Re: Aj's zxr250a project

Post by vanrootn »

zxr250 x2?
ajverma
Warming up
Warming up
Posts: 98
Joined: Wed Jul 13, 2011 6:26 pm
Bike: ZXR750
State: New South Wales

Re: Aj's zxr250a project

Post by ajverma »

vanrootn wrote:zxr250 x2?

you got it! I'd love to contact this guy and find out some more information, I can't imagine a 22000rpm 500cc v8!
User avatar
robracer
VIP MEMBER
VIP MEMBER
Posts: 15251
Joined: Thu Feb 24, 2005 8:23 pm
Bike: ZX6R
State: New South Wales
Location: Port Macquarie

Re: Aj's zxr250a project

Post by robracer »

:shock: no way!
User avatar
timmyrocks
KSRC Contributor
KSRC Contributor
Posts: 2145
Joined: Wed Jan 16, 2008 3:45 pm
Bike: Other Kawi
State: New South Wales
Location: Western Sydney

Re: Aj's zxr250a project

Post by timmyrocks »

That's pretty crazy, alot of work and money would have been pored into the engine....
anyone can go fast in a straight line,,,,

Team Crash "09"

TE310 2011 Husqvarna trail bike :)
WR125 2004 Husqvarna :P
User avatar
greenman43
KSRC Regular
KSRC Regular
Posts: 675
Joined: Fri May 06, 2005 10:01 pm
Bike: ZX6R
State: New South Wales
Location: Brooklyn NSW
Contact:

Re: Aj's zxr250a project

Post by greenman43 »

Good on you AJ, a worthy project for a very first one - nice work so far :kuda:

Cheers,
Brian
07 ZX10R track 09 ZX6R road/track 93 ZXR750 race 89 GPZ900 project
Do not walk behind me, for I may not be leading
Do not walk in front of me, for I may not be following
Do not walk alongside me, for the path may be narrow
Just piss off and leave me alone
ajverma
Warming up
Warming up
Posts: 98
Joined: Wed Jul 13, 2011 6:26 pm
Bike: ZXR750
State: New South Wales

Re: Aj's zxr250a project

Post by ajverma »

greenman43 wrote:Good on you AJ, a worthy project for a very first one - nice work so far :kuda:

Cheers,
Brian
thank you very much my friend! :kuda:

now for more!

guys, now I'm just downright confused... so yesterday I got my bike running really well, but the battery was flat so it only ran for about a kilometre then i let the revs drop too low and it died and I had to run it back... so last night I left it on a charger overnight, and this morning when I start it, it sounds like it's running on two or three cylinders (very very hesitant to rev, and revs very slowly as compared to before). I know it's not the carbs because I cleaned them thoroughly, and I replaced the sparks with iridiums only 3 months ago (I've only run it 3-4 times in that space because it was being built up) now I'm just baffled at why it would run on 2-3 cylinders... I only took it to 17k, and it revs smoothly, but slowly and doesn't develop much power at all, frankly it was slower than a 125. Wtf is going on?
ajverma
Warming up
Warming up
Posts: 98
Joined: Wed Jul 13, 2011 6:26 pm
Bike: ZXR750
State: New South Wales

Re: Aj's zxr250a project

Post by ajverma »

got it, it's the leads, I pulled cylinder 3 (from the left of the bike looking at the headlights) and it sparks fine when trying to start the bike, I checked cylinder 1, no spark on the plug, changed the plug to a brand new one, and still no spark, pulled the wire out of the rubber grommet sort of thing, it is arcing when trying to start the bike but there is nothing coming through to the plug. What do you guys reckon I can do about it?
ajverma
Warming up
Warming up
Posts: 98
Joined: Wed Jul 13, 2011 6:26 pm
Bike: ZXR750
State: New South Wales

Re: Aj's zxr250a project

Post by ajverma »

nevermind, it's not the leads, now I'm just completely confused. here's a video of the problem, forgive my flinching, it is very loud.

PLEASE HELP, I AM SO CONFUSED! Tomorrow I'm going to drain the carbies and fuel tank and make sure it's not that. I have checked the leads, sidestand switch and battery/rec/reg.

I don't have any more ideas if it's not bad fuel...

Image
User avatar
tim
VIP MEMBER
VIP MEMBER
Posts: 5815
Joined: Wed Dec 10, 2008 10:12 pm
Bike: ZX6R
State: New South Wales
Location: Sydney, NSW

Aj's zxr250a project

Post by tim »

Do you know If it's running on all 4 cylinders? While it's running lick your finger or wet a rag and quickly wipe it on the headers near the exhaust outlet and see if the water disappears quickly - if not the cylinder isn't working....
2008 ZX6R Special Edition
ajverma
Warming up
Warming up
Posts: 98
Joined: Wed Jul 13, 2011 6:26 pm
Bike: ZXR750
State: New South Wales

Re: Aj's zxr250a project

Post by ajverma »

right now... none of them are firing! lol
User avatar
tim
VIP MEMBER
VIP MEMBER
Posts: 5815
Joined: Wed Dec 10, 2008 10:12 pm
Bike: ZX6R
State: New South Wales
Location: Sydney, NSW

Aj's zxr250a project

Post by tim »

:)
2008 ZX6R Special Edition
Post Reply