Page 1 of 1
please explain
Posted: Mon Dec 17, 2007 8:22 pm
by 98ninja
trawling ebay and found this
http://cgi.ebay.com/ebaymotors/TPO-Hond ... dZViewItem" target="_blank
another sham?
or is it real? and how does it work?
Re: please explain
Posted: Mon Dec 17, 2007 9:11 pm
by Neka79
i had my 929 apart more times than i care to remember, and id be fucked if i can think of anywhere they would go.... the exhuast valves in the 929 are 4 valves in 4 pipes...
im guessing its sum Californian thing..they have weird emissions..
Re: please explain
Posted: Mon Dec 17, 2007 9:18 pm
by Ratmick
You can get those for the Hornet as well, it's quite a common mod in the US, although the Oz guys that have tried it say it doesn't make much/any difference.
I gather the US model, specifically the California variant, may have much more stringent emissions controls than the Australian model. I think these plates bypass the system.
Mick
Re: please explain
Posted: Mon Dec 17, 2007 9:24 pm
by 98ninja
https://www.tpoparts.com/products/55" target="_blank
recognise that part?
Re: please explain
Posted: Mon Dec 17, 2007 9:50 pm
by Gosling1
Any motorcycle sold in California has different emission controls from the other 48 states ( or 49, whatever) - in the US, they refer to all the other bikes as '48 state' bikes, which means that they are much the same as the ones you and I get here in Oz. Not like the Californian models at all.
The Californian model ZX12R for example, had a charcoal canister in the underseat area !! as part of the emissions controls.
Those 'block-off' plates replace the standard reed-valve outlets which are located in the exhaust side of the cam cover. Don't know exactly how these work, but I believe they allow a one-way flow of engine vapours (which may or may not have some form of oil mist in it), up through the reed-valves and back into the emission system.
Its as ugly as a hatful of arseholes, and the yanks have been doing emission control valves like this on road bikes for decades - back as far as the KZ1000J of 1980 !
Its not really much of a horsepower advantage on the street, but for racing its pretty much a standard performance modification over there.
A lot of current kawasaki models have the KLEEN system fitted from stock, this is probably Kawasaki's version of the same thing that Honda use, or a variation on the theme.
