Kawasaki Sportsbike Riders Club - Australia - Online Forum

hi just need to know of a good tuner in sydney if anyone knows it would be much appreceated

Tex at TJ performance in minchinbury is good.

but not sure if his Dyno is up and running at the moment.

thanks mate

Depends on where you are in Sydney, there is pretty much one in North, South, East and West I'd go to one thats close and knows what they are doing

Hey mate,
I've only ever taken my 06 ZX6R to Battyes Bikes in Menai. He has the dyno and everything there. Has got mine at 105.7 ponies now and that's with 70k on the clock. I don't know much about mechanics so find it hard to trust people and haven't taken it to anyone else for that reason.

Anyone recommend a tuner for a carbied bike with a Dynojet kit?
My bike is running really rough at idle, almost sounds like its misfiring.
Open the taps past 2500 and it flies but wanting to know what the fuelling and tune is like.
I'm based in Rhodes but willing to travel pretty far for a good tuner.

Hi Jim , just need to know if the carbs have been synced ? Have the carbs been cleaned as they will clog the idle jets big time if been left for a while ..Edit have the valves been checked as well .
Dyno Dave is good at what he does as is Harley from RB , the guys at bike biz also know what there doing with a dyno and the guy at Menai as the OP said ..
The main thing you need to do is tell them what AFR's to run as they mainly are out to get high numbers on the dyno , if it was my bike and wanted the most out of it in road style /track you are best telling them you want 12.8/9 to one AFR's , it wont show great dyno results but it will kick ass in the real world and that's on the road / track .. Hope this helps .