Page 1 of 1
2010 z1000 indicators...
Posted: Wed Jan 18, 2012 5:28 pm
by vanrootn
On the weekend i replaced my oem indicators with some smaller ones to suit the fender elim.
I bought some with standard globes as i assumed led's would flash too fast
The problem is these new indicators flash too fast anyway
So i took out the flasher relay and it says on the front 10w + 21w + LED. Does this mean the globes need to be 10 or 21w to flash correctly? Does this also mean i could have bought LED's after all
the new globes are 23w unfortunately....
Re: 2010 z1000 indicators...
Posted: Wed Jan 18, 2012 5:33 pm
by hoffy
Hey mate, you can get fender elims that take the standard indicators, best solution I reckon as they look pretty good..check this out,
http://www.ebay.com.au/itm/Kawasaki-Z10 ... 2eba9681dd
Re: 2010 z1000 indicators...
Posted: Wed Jan 18, 2012 5:34 pm
by hoffy
Hey mate, you can get fender elims that take the standard indicators, best solution I reckon as they look pretty good..check this out,
http://www.ebay.com.au/itm/Kawasaki-Z10 ... 2eba9681dd
Re: 2010 z1000 indicators...
Posted: Wed Jan 18, 2012 5:37 pm
by vanrootn
Too late for that! I had my standard ones mounted to the elim I have but I found they stuck out too far and I kept on booting them as I got on the bike
hence the smaller ones...
Re: 2010 z1000 indicators...
Posted: Wed Jan 18, 2012 5:39 pm
by vanrootn
If I had my chance again I would have bought something similar to that...
Re: 2010 z1000 indicators...
Posted: Wed Jan 18, 2012 5:42 pm
by hoffy
Yeah on that elim they sit in closer together...which is good..
Re: 2010 z1000 indicators...
Posted: Wed Jan 18, 2012 9:20 pm
by Phil
hoffy wrote:Yeah on that elim they sit in closer together...which is good..
Makes yer bum look bigger but
Re: 2010 z1000 indicators...
Posted: Wed Jan 18, 2012 9:48 pm
by hoffy
Phil wrote:hoffy wrote:Yeah on that elim they sit in closer together...which is good..
Makes yer bum look bigger but
not if your covering it with a massive arse top box it dont