Page 1 of 1
					
				HELP - ZX636 05 Headlight Issue
				Posted: Sun May 13, 2012 11:07 pm
				by all_mee
				Hi Guys,
I have a strange problem with my 05 zx636. If I give any gear a good rip past ~12,000rpm, my headlight turns itself off. This was pretty scary the other day when I was driving at high speeds at night. I've now noticed that if this happens, I can reactivate my headlights by turning on my indicator, and then turning it off again. As soon as I do that, the headlight turns itself back on.
Strange problem - anyone heard of this? And how do I fix it??
			 
			
					
				Re: HELP - ZX636 05 Headlight Issue
				Posted: Sun May 13, 2012 11:28 pm
				by 6maniac
				Keep rpm to 11999 or less .... 

 
			 
			
					
				Re: HELP - ZX636 05 Headlight Issue
				Posted: Wed May 16, 2012 6:53 pm
				by Saki
				I assume you've modded your bike some how ? Or is it stock ?
			 
			
					
				Re: HELP - ZX636 05 Headlight Issue
				Posted: Thu May 17, 2012 8:48 am
				by all_mee
				Bike is completely stock besides a slip on exhaust that was professionally installed years ago. Electronics have never been tampered with. I take it this isn't a common fault
			 
			
					
				HELP - ZX636 05 Headlight Issue
				Posted: Thu May 17, 2012 8:56 am
				by tim
				Not common, might make sense to an auto electrician. If you can post a link to the wiring schematic of your bikes electrical system we might be able to give you a hand...
First thing I would do would be to pull apart the light/blinker switch block on the handlebar and spray everything with contact cleaner, turn switches on and off fast over and over, look for corrosion/breaks etc.
			 
			
					
				HELP - ZX636 05 Headlight Issue
				Posted: Thu May 17, 2012 9:05 am
				by tim
				Another thing to do is see if you can duplicate it just sitting there revving it... If it still happens will helpyou diagnose it
			 
			
					
				Re: HELP - ZX636 05 Headlight Issue
				Posted: Thu May 17, 2012 11:53 pm
				by all_mee
				tim wrote:Not common, might make sense to an auto electrician. If you can post a link to the wiring schematic of your bikes electrical system we might be able to give you a hand...
First thing I would do would be to pull apart the light/blinker switch block on the handlebar and spray everything with contact cleaner, turn switches on and off fast over and over, look for corrosion/breaks etc.
Thanks Tim. Will start revving in the garage to see if the problem persists. 
Do u have any idea where to start when pulling apart the light/blinker switch box?
 
			 
			
					
				Re: HELP - ZX636 05 Headlight Issue
				Posted: Fri May 18, 2012 1:54 am
				by tim
				The bolt that holds it together  

 
			 
			
					
				Re: HELP - ZX636 05 Headlight Issue
				Posted: Fri May 18, 2012 1:58 am
				by Blurr
				6maniac wrote:Keep rpm to 11999 or less .... 

 
12K on a 6r is just above idle  

 
			 
			
					
				HELP - ZX636 05 Headlight Issue
				Posted: Fri May 18, 2012 6:45 am
				by Wattie
				Blurr wrote:6maniac wrote:Keep rpm to 11999 or less .... 

 
12K on a 6r is just above idle  

 
Dont they idle at 7k?
 
			 
			
					
				Re: HELP - ZX636 05 Headlight Issue
				Posted: Tue May 22, 2012 7:49 pm
				by loubre
				Wattie wrote:Blurr wrote:6maniac wrote:Keep rpm to 11999 or less .... 

 
12K on a 6r is just above idle  

 
Dont they idle at 7k?
 
Nah That's just where the fun starts 

 
			 
			
					
				HELP - ZX636 05 Headlight Issue
				Posted: Tue May 22, 2012 8:40 pm
				by StuMiller
				Try doing a wheelie and see if that helps.
Then maybe a burnout at 13k rpm...I think that will do the trick!