my new zrx ..... finally
- matchan
- KSRC Contributor
- Posts: 1351
- Joined: Thu Apr 22, 2004 12:03 am
- Bike: ZX6R
- State: New South Wales
- Location: Sydney
retail is about 14500 on the road, but I'd be surprised if anyone paid that.krusty wrote:I know its rude to ask, but what is the ZRX roughly worth new.
I'm thinking of getting one in the not too distant future.
there is a rumor that this years (2006) may be the last, and they have changed the colour back to lime green instead of the metalic
Cheers,
Matt
- matchan
- KSRC Contributor
- Posts: 1351
- Joined: Thu Apr 22, 2004 12:03 am
- Bike: ZX6R
- State: New South Wales
- Location: Sydney
Cheers James, pharking hell, 165hp !! I just don't seem to have USD2600 free at the momentJames wrote: Have a look at Muzzy's http://muzzys.com/ZRX-1200/mods/index.html

Matt
More power??, the torque should keep you happy.
A pipe would be a worthy edition, it does free up the top end alot.
I saw a dyno graph compared to 04 Blade, The rex makes more torque through to the 10k rpm limit, only above 10k rpm are the litre bikes making more power & torque, keep in mind the rex is already doing similar speeds at 10k rpm as the blade at much higher revs. It could use a 6 speed box to make better use of this power, but hey thats extra shifts....
If I find the dyno chart i'll whack it up,
You comin out this sunday to PITS?
A pipe would be a worthy edition, it does free up the top end alot.
I saw a dyno graph compared to 04 Blade, The rex makes more torque through to the 10k rpm limit, only above 10k rpm are the litre bikes making more power & torque, keep in mind the rex is already doing similar speeds at 10k rpm as the blade at much higher revs. It could use a 6 speed box to make better use of this power, but hey thats extra shifts....
If I find the dyno chart i'll whack it up,
You comin out this sunday to PITS?
-
- Warming up
- Posts: 87
- Joined: Wed Nov 23, 2005 10:04 am
- Location: Altona Meadows Melbourne
- Contact:
rex
I have a 2001 zrx and it took a bit of getting used to not having a 6th gear after riding a zx9r, but the roll on in top gear on these things is amazing especially when the jets have been done and u have a full race system fitted, i still havent got my dyno chart back yet, but it stated out at 132hp with just a slip on akra, enjoy lins
Looking for people to ride with in my area or somewhere close.
- matchan
- KSRC Contributor
- Posts: 1351
- Joined: Thu Apr 22, 2004 12:03 am
- Bike: ZX6R
- State: New South Wales
- Location: Sydney
Yep, a pipe is on the list, just for the look & noise at this stage and maybe some renthal bars but other than that I think I'll just ride it for a bit and then see what I think needs doing.hoffy wrote:More power??, the torque should keep you happy.
A pipe would be a worthy edition, it does free up the top end alot.
<Snip>
You comin out this sunday to PITS?
Should be at PiTS 9ish, so see you there.
Cheers
Matt