Cheers Niki
Oh im also after a right had side front fairing and main front fairing if anyone could help out had a bit of a tip the other weeks
mounting crash knobs/crash sliders to zxr250
mounting crash knobs/crash sliders to zxr250
Wanting to put some crash knobs/ crash sliders onto my 2000 import zxr250 and was wondering if anyone has attempted ths and could help out.
Cheers Niki
Oh im also after a right had side front fairing and main front fairing if anyone could help out had a bit of a tip the other weeks
Cheers Niki
Oh im also after a right had side front fairing and main front fairing if anyone could help out had a bit of a tip the other weeks
-
I-K
- KSRC Contributor
- Posts: 1035
- Joined: Sun Jan 02, 2005 3:22 pm
- Bike: Suzuki
- State: New South Wales
- Location: Sydney (again...)
The only crash knobs worth fitting are the ones which attach to the top engine mounts. On the ZXR250, the top engine mounts are behind the fairing. So, to get a set of crash knobs onto your bike, you're looking at hole-sawing a couple of 60mm-diameter holes into your fairing.
This question has come up no small number of times on a number of forums, and nobody's ever come back with anyone who makes a crash knob kit for the ZXR250, but all you need to make your own is a couple of big high-tensile bolts, some Delrin rod and access to a lathe.
This question has come up no small number of times on a number of forums, and nobody's ever come back with anyone who makes a crash knob kit for the ZXR250, but all you need to make your own is a couple of big high-tensile bolts, some Delrin rod and access to a lathe.