Would my 05 636 be?

[L3raven]

stand chain n sprocket size 530 525 or 520?? im buyin new 1's vortex look also should i replace my chain at the same time??

[J.B]

520 and the front and rear sprockets are 15T and 43T respectively. If you're doing the sprockets, do the chain as well.

[Neka79]

520 and the front and rear sprockets are 15T and 43T respectively. If you're doing the sprockets, do the chain as well.

really?? i thought they were 525.... my zed is 525...


u better check anyway Raven- in case they arent the stock ones anyway!!

and if ur doing one, u do em all, in which case it dont matter if u go 520/525/530 .....

520 is lighter and weaker...

530 will last longer....but heavier..

525 is a good medium...

[J.B]

really?? i thought they were 525.... my zed is 525...

yep, I thought it was odd too but thats what they put in the manual, the 03-04 run 520's as well.

[L3raven]

525 ppl...

[Neka79]

either way...they say u should do all 3 together anyway, so it wont matter what u get, as long as they all match...

what is on it now might not even be standard!!

if ur gunna go down a tooth on the front for acceleration, id go with a stronger set (525 or 530)..i destroyed the 520 set i had on my 929 really quickly (the shop recom it..what a dick they were)

[J.B]

525 ppl...

Really?? Where'd you find that?

[GForce]

mine is a 520 and the manual says its a 520 too with a 15f and 43r sprocket.

[L3raven]

thats how i bought it so might have 2 check with the guy i bought it off 2 wat it is running as in the sprocket sizing.

[Neka79]

if 15/43 is the standard.... well me being me, and loving acceleration and wheelies ...

id go a 525 14/43

but if i was in the NT with no speed limits...and 250+ was often..id go 525 14/43 anyway..cos ud still get close to 250kph but get there a bit quicker and more funly (is that even a word??)