Service

[red_dave]

Bikebiz was only on here few months back defending themselves over another issue...

Might be worth letting them know of the service you got so they can at least have a chance to address it. Feedback, whether good or bad, is very important.

[BikerBoy]

Just an oversight lucky its still got some
So what were they doing removing them anyway?[/quote]

to check the nuts to the handle bars were tight i guess ?? to get to the pivot points below to lube? not really sure.
i can understand forgetting something plastic, but what if it was something more crucial

wouldn't you put all the screws, bolts etc in the one place (little box) so you see all the bolts you need to put back on... ?

[BikerBoy]

heh

[robracer]

wouldn't you put all the screws, bolts etc in the one place (little box) so you see all the bolts you need to put back on... ?

Naaaa just ask Gos.... you aint doing it right unless you have a handfull of bits left over

[frog]

Big thumbs up for Wurths in Rockhampton, yep they are the Yammie dealer but STILL cheaper than the Kwaka dealer in town FOR Kwaka parts
HTF does that work ??
Also mates rates for people that turn up regularly for Sunday rides.
Wicked

[maraach]

Well have to add Flywheels to my list now. This may be a little premature as I haven't actually had any work done by them yet, but im pretty sure im going to go back there.

My wife's bike got reversed over two weeks ago, and trying to get quotes has been a real pain for us (i usually work 6 days which rules out a lot of bike shop visiting). Anyhow, we dropped in to see if we could get an assessment and the workshop was closed. At that stage i seriously thought we would have just been turned away (most bike shops i know would have) but Ron (or was it Rob? bother i need a new memory) said he would come out have a look over it, and if it wasnt too bad sort out a quote next week for us.

Both my wife an I left extremely impressed with the friendly service, and agreed we would be returning. Plus a whole shop full of Kawasaki's? What isn't to love.

[Disco]

I recently had a bad experience with a cirtain large dealership in kogerah.Took my bike there to get crash's fitted all seemed fine untill the next day when halfway on my way to picton on a ride the engine started to nock with acceleration.Pricks didn't re tighten the engine mounts propely.Luckily a reputable ksrc sponsor came to the rescue and fixed the problem before any real damage could be done won't make the same mistake and go to a large dealership where your just a number in the future!!!!!!

[DaveGPz]

Tim at InTune, and all at Bikemart - Ringwood, Victoria (Mexico)

[DaveGPz]

Tim at InTune, and all at Bikemart - Ringwood, Victoria (Mexico)

[swearbear9r]

Boltons the Friday F#CK WITT

Boltons Boltons how hard is it really……… well 2day I thought I might have a look at the air filter and maybe give it a clean well when I took the air box lid off FACKUK Me !!!!!! Somehow in their quality workmanship there, they somehow put the air filter in upside down and they forgot to put the rubber seal back in under the lid………..COME ON,,,,,,,

[luis kawi]

was there once and was very impressed with what ive seen (very professional) wouldnt mind at all making business with them