Bent LHS crash
- fireyrob
- KSRC Addict
- Posts: 4828
- Joined: Wed Mar 12, 2008 10:13 am
- Bike: Z1000
- State: New South Wales
- Location: Ashfield
Bent LHS crash
Hey all,
Now after my spill last weekend not sure what to make of this... After I removed the left crash holder I found a broken part underneath that seems to be a heat shield or sorts??? Not entirely sure... Any need to worry about it? Its only broken at the bottom... See pics
Ive also attached a pic of the crash Frame. Whats the best way to straighten this? The bar between the holders is slightly bent as well. Same fix?
Cheers
Now after my spill last weekend not sure what to make of this... After I removed the left crash holder I found a broken part underneath that seems to be a heat shield or sorts??? Not entirely sure... Any need to worry about it? Its only broken at the bottom... See pics
Ive also attached a pic of the crash Frame. Whats the best way to straighten this? The bar between the holders is slightly bent as well. Same fix?
Cheers
- Attachments
-
- This is where I first see it and I quote "Oh f!)(#^&#*^#)(@!_!*(#@*^*#&@"
- LHS1a.jpg (82.91 KiB) Viewed 1196 times
-
- Broken Part In
- LHS2a.jpg (74.56 KiB) Viewed 1194 times
-
- Broken Part Out
- LHS3a.jpg (66.58 KiB) Viewed 1194 times
-
- LHS Bent Oggy a.jpg (85.5 KiB) Viewed 1193 times
09 ZX6R
03 Zthou
03 Zthou
- robracer
- VIP MEMBER
- Posts: 15251
- Joined: Thu Feb 24, 2005 8:23 pm
- Bike: ZX6R
- State: New South Wales
- Location: Port Macquarie
Re: Bent LHS crash
We will sort it grasshopper 

- Wattie
- VIP MEMBER
- Posts: 10041
- Joined: Mon Oct 31, 2005 12:23 pm
- Bike: ZX10R
- State: New South Wales
- Location: Bligh Park
Re: Bent LHS crash
ouch... 
i would be looking for a different brand crash knob, if thats what happens with a 30km/hr fall in the grass.
might want to hunt down a wrecker fpr that part.
thats a bitch of a thing.

i would be looking for a different brand crash knob, if thats what happens with a 30km/hr fall in the grass.

might want to hunt down a wrecker fpr that part.
thats a bitch of a thing.

Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
- Damon Z1000
- KSRC Contributor
- Posts: 1617
- Joined: Sun Oct 10, 2004 4:13 pm
- Bike: Z1000
- State: New South Wales
- Location: Bligh Park NSW
Re: Bent LHS crash
Good example why Oggys aren't always wise.
When the bike actually falls onto the crash this sort of thing can happen, whereas if the bike has forward momentum as it lands it reduces the pressure to the mount point and just grinds the crash.
Surely you aren't up for a new frame?
When the bike actually falls onto the crash this sort of thing can happen, whereas if the bike has forward momentum as it lands it reduces the pressure to the mount point and just grinds the crash.
Surely you aren't up for a new frame?
Watch This Space.......I Told You Didn't I?
Officially Honoury Member NWSHCIAVANEWFARKINBIKE 2009.
Team Crash 2010 Ooooops
Officially Honoury Member NWSHCIAVANEWFARKINBIKE 2009.
Team Crash 2010 Ooooops
Re: Bent LHS crash
looks like a replaceable part of the frame, get on US ebay for a replacement part, should be OK.
I dont fit crash's to the 12, as I have heard they do more damage etc to frame and mounts, at least it will just rash up fairings if it goes down..
I dont fit crash's to the 12, as I have heard they do more damage etc to frame and mounts, at least it will just rash up fairings if it goes down..
- fireyrob
- KSRC Addict
- Posts: 4828
- Joined: Wed Mar 12, 2008 10:13 am
- Bike: Z1000
- State: New South Wales
- Location: Ashfield
Re: Bent LHS crash
Nah, just the engine mounting plate... Like you said it was more of a sideways fall than a slide as I was cruising along the grass and hit a ditch that I didnt seeDamon ZX9R wrote:Surely you aren't up for a new frame?

09 ZX6R
03 Zthou
03 Zthou
- Tinman
- VIP MEMBER
- Posts: 1293
- Joined: Fri Aug 24, 2007 6:35 pm
- Bike: ZX6R
- State: New South Wales
- Location: Sydney No Internet East Hills
Re: Bent LHS crash
With your oggys rob did they come with brackets?? and how are you going with it
Live 2 Ride!
Honda 2003 Race bike
2009 Mozzie Green ofcourse
http://www.rcutopia.com.au
Honda 2003 Race bike
2009 Mozzie Green ofcourse
http://www.rcutopia.com.au
- fireyrob
- KSRC Addict
- Posts: 4828
- Joined: Wed Mar 12, 2008 10:13 am
- Bike: Z1000
- State: New South Wales
- Location: Ashfield
Re: Bent LHS crash
Bracket straightened using a Vice and shifter... Its good enough!
Have found the part at a wreckers in Melbourne!
Ill post a pic of my smile when it arrives (if its right)
Have found the part at a wreckers in Melbourne!

09 ZX6R
03 Zthou
03 Zthou
- Blurr
- Apprentice Post Whore :-)
- Posts: 7246
- Joined: Wed Apr 02, 2008 10:31 pm
- Bike: ZX10R
- State: New South Wales
- Location: Stockton
Re: Bent LHS crash
good result rob. all set for PIfireyrob wrote:Bracket straightened using a Vice and shifter... Its good enough!
Have found the part at a wreckers in Melbourne!Ill post a pic of my smile when it arrives (if its right)
Chariot of Fury 50cc 2stroke Race bike
Team Gumby in red
SAM & SRT Survived
Team Gumby in red
SAM & SRT Survived
Re: Bent LHS crash
id be sending an email to the crash people and telling them their crash's are shite too !