ER 5 Instrument Lights

For general Technical and Performance Discussions
Post Reply
jordan66
Newbie
Posts: 1
Joined: Tue Nov 04, 2008 3:03 pm
Bike: ER5
State: New South Wales

ER 5 Instrument Lights

Post by jordan66 »

Hi ,ive very recently bought a 2005 model er 5 but the lights dont work on the instrument panel,i cant see the speedo at night!!,is there a fuse for this somewhere??,ive looked but cant find anything,or would it be just a globe??,i know very little about bikes

also the brake light doesnt work when i apply the front brakes,but the rear works fine??,is this a fault at the actual lever itself>>,can anybody help me???

Many Thanks

scott
User avatar
dave#3
Team Ninja
Posts: 3098
Joined: Mon Apr 26, 2004 7:11 pm
Bike: Z1000
State: New South Wales
Location: Kyogle, NSW
Contact:

Re: ER 5 Instrument Lights

Post by dave#3 »

G'day Scott, and welcome to KSRC. I suspect the gauge lights aren't fused - they use a small globe which goes into the rear of the panel - probably a blade fitting of some description. Check them before you go chasing any other faults, and if the globe(s) seem Ok use a multi-meter to check for 12 volts at the fitting when you've got the ignition on (bike running).

For the brake lights I'd first check to make sure the switch on the bar is connected, and if it is spray some WD40 on it to make sure it's not sticking.

Update your profile with the area you're in and there's a good chance someone local will be able to have a look at it with you.
dave#3 | '03 z1000 roadie | '08 zx6r tracky | '03 KLX400R dirty
http://www.oz4x4.net/gallery2
Winner - KSRC Murphy's Law Award 2008
Post Reply