My workshop is located in an industrial area and just up the road a new ws is almost finished , the twist is that the workers constructing said ws/shed are family / friends or something and all are living in the shed at the moment ie man/womwn /kids /dogs etc etc...
So what's the point???
On Sat night my offsider and I finished a cam upgrade in one of the toys , and finally got it fired up etc.....
Ok so it's a V8 running straight out the extractors and a touch loud BUT.. At 10.00, at night on a Saterday in an industrial area should my apparently illegally housed neigbours have the right to call the cops to get us to shut the noise down???
As far as I was aware noise restrictions do not apply to zoned industrial areas ... anyone shed any light on zoning / zoning occupancy in industrial areas??
Zoning guru's advice wanted
- IsleofNinja
- KSRC Contributor
- Posts: 1021
- Joined: Wed Nov 21, 2007 10:08 pm
- Bike: ZX10R
- State: Western Australia
- Location: That tiny black dot in the distance.......
Zoning guru's advice wanted
06 ZX10r , 95 ZX9r
97 GSF1200 project streetfighter
07 FXST
EXPERIENCE:ex_spear_ee_anse :noun: Knowledge or skill derived from actual participation or direct contact rather than mere study, interest or internet.
97 GSF1200 project streetfighter
07 FXST
EXPERIENCE:ex_spear_ee_anse :noun: Knowledge or skill derived from actual participation or direct contact rather than mere study, interest or internet.
- Strika
- VIP MEMBER
- Posts: 8373
- Joined: Tue Feb 01, 2005 8:02 am
- Bike: Yamaha
- State: Victoria
- Location: Melbourne
Re: Zoning guru's advice wanted
Not sure about Noise restrictions, but i'd just call the council and make an anonymous complaint about them residing in the W/S. 

"I hate to advocate drugs, alcohol, violence or insanity to anyone, but they've always worked for me" Hunter S. Thompson.
There are really only two questions in life. 1.Which way do i go? 2.What is the lap record?
There are really only two questions in life. 1.Which way do i go? 2.What is the lap record?
- Frank
- KSRC Contributor
- Posts: 1432
- Joined: Tue Jun 07, 2005 10:23 pm
- Bike: ZX9R
- State: New South Wales
- Location: Shaggers Ridge, Sydney
Re: Zoning guru's advice wanted
It will depend on how far you are from a residenital area, even though you are in an industrial estate, if there is any overly loud outside of reasonable works hours you may still be subjected to noise regs if you are close by to homes, but as for the illegals up the road report them to council as they shouldn't be living there let alone reporting you for noise complaints.
GO THE BLUES
Life time member of PETA:-
PEOPLE for the EATING of TASTY ANIMALS
Member of SRT
1998 Kawasaki ZX9R Track Bike
2014 Nissan Navara
Life time member of PETA:-
PEOPLE for the EATING of TASTY ANIMALS
Member of SRT
1998 Kawasaki ZX9R Track Bike
2014 Nissan Navara
- Smitty
- VIP MEMBER
- Posts: 10912
- Joined: Wed Apr 21, 2004 1:59 pm
- Bike: ZX12R
- State: Victoria
- Location: 3rd rock from the Sun
- Contact:
Re: Zoning guru's advice wanted
dunno about where your w/shop is
but in Vic noise limits do apply to industrial areas
we run (in one of our locations) a metal stamping and forge shop
NOISE? loud as in VERY loud like 140+dB
we are restricted in the times we can open the doors (to receive supplies etc)
because we upset the neighbours
yes too much noise 
but in Vic noise limits do apply to industrial areas
we run (in one of our locations) a metal stamping and forge shop
NOISE? loud as in VERY loud like 140+dB

we are restricted in the times we can open the doors (to receive supplies etc)
because we upset the neighbours


GOTTA LUV the 12R!!
- IsleofNinja
- KSRC Contributor
- Posts: 1021
- Joined: Wed Nov 21, 2007 10:08 pm
- Bike: ZX10R
- State: Western Australia
- Location: That tiny black dot in the distance.......
Re: Zoning guru's advice wanted
Cheers for responses guys;
Spoke to council CEO (as it happens we service their fleet vehicles particularly his on the Monday)
Apparently noise restrictions do apply after 10 pm on Sat /all day Sun measured from the "most sensitive residence" restriction being 45Db
In the case of these clowns , the CEO confirmed that they were illegally residing on the premices and prompty gave them their marching orders (upon picking up his freshly cleaned/detailed/serviced vehicle
)
Problem eliminated

{How many red blooded Aussies DON'T like the sound of a high compression big cammed V8 anyway?? bloody fairies
}
Spoke to council CEO (as it happens we service their fleet vehicles particularly his on the Monday)
Apparently noise restrictions do apply after 10 pm on Sat /all day Sun measured from the "most sensitive residence" restriction being 45Db
In the case of these clowns , the CEO confirmed that they were illegally residing on the premices and prompty gave them their marching orders (upon picking up his freshly cleaned/detailed/serviced vehicle

Problem eliminated


{How many red blooded Aussies DON'T like the sound of a high compression big cammed V8 anyway?? bloody fairies


06 ZX10r , 95 ZX9r
97 GSF1200 project streetfighter
07 FXST
EXPERIENCE:ex_spear_ee_anse :noun: Knowledge or skill derived from actual participation or direct contact rather than mere study, interest or internet.
97 GSF1200 project streetfighter
07 FXST
EXPERIENCE:ex_spear_ee_anse :noun: Knowledge or skill derived from actual participation or direct contact rather than mere study, interest or internet.
- Six Addict
- Pinchy
- Posts: 6465
- Joined: Sun Apr 06, 2008 3:51 pm
- Bike: Ducati
- State: New South Wales
- Location: Darlinghurst, Sydney
Re: Zoning guru's advice wanted
i wouldnt if it was 10pm saturday night and i was next door 

DUCATI HYPERMOTARD 2014
- Dizzi
- KSRC Contributor
- Posts: 1162
- Joined: Fri May 08, 2009 9:17 pm
- Bike: ZX6R
- State: New South Wales
- Location: Da Pie In Da Sky but ver else!!!
Re: Zoning guru's advice wanted
Yeah must admit if it was 10pm on a Saturday night and we were next door we would probably come over and check it out
but glad it got resolved for you mate as they say it's not what you know but who you know. 


10 Green ZX6R
I'm selfish, impatient and a little insecure. I make mistakes, I am out of control and at times hard to handle. But if you can't handle me at my worst, then you sure as hell don't deserve me at my best.
I'm selfish, impatient and a little insecure. I make mistakes, I am out of control and at times hard to handle. But if you can't handle me at my worst, then you sure as hell don't deserve me at my best.
- IsleofNinja
- KSRC Contributor
- Posts: 1021
- Joined: Wed Nov 21, 2007 10:08 pm
- Bike: ZX10R
- State: Western Australia
- Location: That tiny black dot in the distance.......
Re: Zoning guru's advice wanted
Point being "industrial area' .....
eg; You don't buy a house near an airport coz it's dirt cheap then complain to the airport about the noise now do you!?
If there WAS someone living next door I would have been a bit more concious of their proximity and prob left the start up till the following day etc..
The clowns in question were approx 300m up the road and NOT supposed to be living there anyway..
on a Sat night I say HTFU!!!! (unless you have small kids of course
)
eg; You don't buy a house near an airport coz it's dirt cheap then complain to the airport about the noise now do you!?
If there WAS someone living next door I would have been a bit more concious of their proximity and prob left the start up till the following day etc..
The clowns in question were approx 300m up the road and NOT supposed to be living there anyway..
on a Sat night I say HTFU!!!! (unless you have small kids of course


06 ZX10r , 95 ZX9r
97 GSF1200 project streetfighter
07 FXST
EXPERIENCE:ex_spear_ee_anse :noun: Knowledge or skill derived from actual participation or direct contact rather than mere study, interest or internet.
97 GSF1200 project streetfighter
07 FXST
EXPERIENCE:ex_spear_ee_anse :noun: Knowledge or skill derived from actual participation or direct contact rather than mere study, interest or internet.