Rear wheel horsepower

For general Technical and Performance Discussions
Post Reply
oldman

Rear wheel horsepower

Post by oldman »

Has anybody had there rear wheel HP checked before modifications on a 2003 to 2006 Z1000? According to the service manual Aussie Z's have a higher HP output than the U.S. model. This i believe is due to the ECU or possibly because it's Australian. I had mine dynoed before the mods and it was 121 HP to the rear wheel, this is at 4600 feet altitude. Of course dynoes vary so unless we had a direct comparrison it is really hard to tell. Remember a Jim Beam and a good brew enhance the tuning experience. If one is good 10 is better.
User avatar
seiko1
Apprentice Post Whore :-)
Apprentice Post Whore :-)
Posts: 7643
Joined: Wed Jan 14, 2009 8:36 pm
Bike: ZX14R
State: Victoria
Location: Geelong

Re: Rear wheel horsepower

Post by seiko1 »

We're so dumb here, we do the front wheel horses :D
Policy - Find something simple.....and Complicate it!
User avatar
smithy5
VIP MEMBER
VIP MEMBER
Posts: 3467
Joined: Wed Oct 15, 2008 11:37 am
Bike: Scooter
State: New South Wales
Location: Kurrajong, NSW

Re: Rear wheel horsepower

Post by smithy5 »

I like your thinking oldman :? :? The way you add a brew to every post that is........ and now a jimmy as well :lol: :lol:

ooohhh and I do agree the 10 is better :lol: :lol: you do mean the ZX10, don't you.......
2013 Triumph Thunderbird 1700 Storm
Suzuki 1300 LillBusa Ute
Serviced by Allfixed Automotive Castle Hill PH: (02) 9634 1455
SRT Survivor & Oficial Photographer
User avatar
Wattie
VIP MEMBER
VIP MEMBER
Posts: 10041
Joined: Mon Oct 31, 2005 12:23 pm
Bike: ZX10R
State: New South Wales
Location: Bligh Park

Re: Rear wheel horsepower

Post by Wattie »

my old (03) Z1000 did 123HP at the wheel with stock pipes and airbox lid mod.


we had 3 zx10r 05 models all within 1 HP of each other at 155HP at rear wheel on the same dyno same day.

theres a bit of comparison for you.

my guess is that we would have been 500Feet above sea level.
Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
User avatar
Gosling1
Team Donut
Team Donut
Posts: 13826
Joined: Mon Jun 20, 2005 9:30 pm
Bike: ZX2R
State: New South Wales
Location: Anarchy Road
Contact:

Re: Rear wheel horsepower

Post by Gosling1 »

Wattie wrote:.....my guess is that we would have been 500Feet above sea level......
:lol: :lol: :lol: :lol: did you get 'em dynoed up here at Anarchy Road mate ????? We are about 650 feet above sea level, down where you are, maybe 100 feet above sea level *max*.

oldman - 121 rwhp for that model Z1000 sounds pretty much on the money - is yours a California model or 48-stater ??

8)
".....shut the gate on this one Maxie......it's the ducks guts !!............."
jonoZRX

Re: Rear wheel horsepower

Post by jonoZRX »

Gosling1 wrote:did you get 'em dynoed up here at Anarchy Road mate ????? We are about 650 feet above sea level, down where you are, maybe 100 feet above sea level *max*.
I know Belco is a hole, but it's not that deep :lol: It is about 600 metres above sea level.
User avatar
Gosling1
Team Donut
Team Donut
Posts: 13826
Joined: Mon Jun 20, 2005 9:30 pm
Bike: ZX2R
State: New South Wales
Location: Anarchy Road
Contact:

Re: Rear wheel horsepower

Post by Gosling1 »

yeh metres, that's what I meant.

Thank god you're a trained professional !! :lol: :lol:
".....shut the gate on this one Maxie......it's the ducks guts !!............."
oldman

Re: Rear wheel horsepower

Post by oldman »

I wish i could have a ZX10r but my back will not take the riding position. Sounds like the HP is pretty close. I think it is the Calif. model as it had the fuel condensor under the seat, (I removed it as I could not fit my beer in the storage compartment). Thanks for the info.
Post Reply