Have replaced ecu & wiring harness with an american setup but still no fuel pump or servo motor
any ideas to get the girl going? cheers Bwz1a
07zx10 wiring ??
-
Wattie
- VIP MEMBER
- Posts: 10041
- Joined: Mon Oct 31, 2005 12:23 pm
- Bike: ZX10R
- State: New South Wales
- Location: Bligh Park
Re: 07zx10 wiring ??
kill switch?
in gear?
clutch switch? sidestand switch?
in gear?
clutch switch? sidestand switch?
Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
-
Gosling1
- Team Donut
- Posts: 13826
- Joined: Mon Jun 20, 2005 9:30 pm
- Bike: ZX2R
- State: New South Wales
- Location: Anarchy Road
- Contact:
Re: 07zx10 wiring ??
Australian harness ?? (maybe the US stuff has some pollution control that we don't, the ECU is not sensing it, so no start ?)
".....shut the gate on this one Maxie......it's the ducks guts !!............."
-
bwz1a
- Newbie
- Posts: 10
- Joined: Sat Aug 30, 2008 2:21 pm
- Bike: Z1000
- State: New South Wales
- Location: Chipping Norton NSW
Re: 07zx10 wiring ??
Thanks for the input ,
I found the side stand connection & bridged them out & it started
the servo mtr worked as you accellerated so i thought it was sorted!
I turned it off after running it for 5 minutes to tape up unused wires & sure enough it wont start again
HELP !
I found the side stand connection & bridged them out & it started
the servo mtr worked as you accellerated so i thought it was sorted!
I turned it off after running it for 5 minutes to tape up unused wires & sure enough it wont start again
HELP !
-
greenman43
- KSRC Regular
- Posts: 675
- Joined: Fri May 06, 2005 10:01 pm
- Bike: ZX6R
- State: New South Wales
- Location: Brooklyn NSW
- Contact:
Re: 07zx10 wiring ??
Definitely nothing to do with the clutch cut-out switch that Wattie mentioned, Gary ?
BTW, are you going to be in on Saturday morning ? I can possibly get over (pretty early) and drop the wheel off.
Cheers,
Brian
BTW, are you going to be in on Saturday morning ? I can possibly get over (pretty early) and drop the wheel off.
Cheers,
Brian
07 ZX10R track 09 ZX6R road/track 93 ZXR750 race 89 GPZ900 project
Do not walk behind me, for I may not be leading
Do not walk in front of me, for I may not be following
Do not walk alongside me, for the path may be narrow
Just piss off and leave me alone
Do not walk behind me, for I may not be leading
Do not walk in front of me, for I may not be following
Do not walk alongside me, for the path may be narrow
Just piss off and leave me alone
-
bwz1a
- Newbie
- Posts: 10
- Joined: Sat Aug 30, 2008 2:21 pm
- Bike: Z1000
- State: New South Wales
- Location: Chipping Norton NSW
Re: 07zx10 wiring ??
Getting hold of a workshop manual for the fault codes to sort iy !!!
Thanks Brian see you sat
cheers Gary
Thanks Brian see you sat
cheers Gary