06 zx6r test ride!

[Kawawog]

Thats a pretty fuckin tidy 06

[Mikey84]

Thats a VERY sexy machine you cant go wrong with the 636! just do it mate!

[-b-r-e-n-t-]

Buy it! Looks hot mate!

[kevindinho]

Peer Pressure!!!!!

[kevindinho]

OMG i just realised that my first post for this thread was @ Sunday 18 april 6:36pm!! hahaha its a sign!!

[Reedy]

yeh.

stop bitchin and buy it.

then next time you come out i will break it in for you

[tim]

it is!

[P4nza]

r6's r for sawft corks!!

[zx-10r]

Peer Pressure!!!!!

get it!

As for the vibrations, im guessing they are normal. Just like when you hold a whipper snipper

[un_majstk]

fwoaaaaaaaaaar. that black is hot.

[Kawawog]

The vibrations could be the front wheel balance too.. I got new tires fitted and wheels balanced today on my 2009 zx10r with weights added to the front wheel and the vibration i had is now gone

[kevindinho]

The vibrations could be the front wheel balance too.. I got new tires fitted and wheels balanced today on my 2009 zx10r with weights added to the front wheel and the vibration i had is now gone

Ahhh thanks kawawog!! That sounds spot on, the dude has only done 3500ks. I'll def look into that

[wilf]

Hey thats a lovely bike kev. I went from a 250 to a 636 as well and I found the vibrations were a tad annoying. I got a set of HVMP bar ends from the us and they made a HEAP of difference. I tested them back to back against the stock bar ends. I found on the stock bar ends the vibration was the worst during highway speeds when revs are constant I think around the 7k - 9krpm mark. The bar ends eliminated 95% of the buziness and it doesnt even cross my mind anymore when I ride. Yes they are a bit big, but seriously, they work well and you'll get use to the look of them.

http://hvmp.com/

[kevindinho]

I did some research, came up with the conclusion that the front springs are too stiff for me, the stock springs suite a 100kg rider and i weigh only 75kgs.

Wilf- i had a look at ur 04 model? its also suited for a 100kg rider, check it out
http://old.racetech.com/evalving/englis ... me=english

[Blurr]

BS

you beleiev everything you read on the interweb!!!!

I have never met a 100kg asian , even when they are if full leathers the best you'd get would be 45kg