Does anyone here bend steel pipe?
I want to fabricate a link pipe for the 08 ( a short piece of SS pipe that connects the headers to the slip on).
Need to do this relatively soon so i can run the PC with a decent map.
Any help would be appreciated
cheers
Link Pipe
-
MadKaw
- Administrator
- Posts: 9671
- Joined: Tue Apr 20, 2004 4:33 pm
- Bike: ZX10R
- State: New South Wales
- Location: Windsor or the Creek..
- Contact:
Re: Link Pipe
Glen at Allfixed knocked one up for me...
Dave
2010 Z1000
ex bikes
05 ZX-10R Race Bike - No.77
95 ZXR750R M Race Bike - No. 75
98 ZX9R Race Bike - No. 000
zx6r, zx7r, GPX750, GPX500, lots of KX's.
I ride way too fast to worry about cholesterol
2010 Z1000
ex bikes
05 ZX-10R Race Bike - No.77
95 ZXR750R M Race Bike - No. 75
98 ZX9R Race Bike - No. 000
zx6r, zx7r, GPX750, GPX500, lots of KX's.
I ride way too fast to worry about cholesterol
-
Blurr
- Apprentice Post Whore :-)
- Posts: 7246
- Joined: Wed Apr 02, 2008 10:31 pm
- Bike: ZX10R
- State: New South Wales
- Location: Stockton
Re: Link Pipe
Ahhh yes our trusty sponsor........Ohhh how I forget so quickly 
Thanks Dave
Thanks Dave
Chariot of Fury 50cc 2stroke Race bike
Team Gumby in red
SAM & SRT Survived
Team Gumby in red
SAM & SRT Survived
-
Six Addict
- Pinchy
- Posts: 6465
- Joined: Sun Apr 06, 2008 3:51 pm
- Bike: Ducati
- State: New South Wales
- Location: Darlinghurst, Sydney
-
triway
- KSRC Member
- Posts: 341
- Joined: Tue Jan 01, 2008 8:17 pm
- Bike: Other Kawi
- State: Victoria
- Contact:
Re: Link Pipe
Russ you can buy pre fabricated stainless bends in varying degrees, and straight pipe. Just work out what bends you need and cut it all to fit together yourself. All you need is it to be welded together then.
Most benders will distort the pipe at the bend reducing the radius, which effects performance, unless you can find someone with a mandrel bender(not many around).
My way took me about 20mins including the welding!
Most benders will distort the pipe at the bend reducing the radius, which effects performance, unless you can find someone with a mandrel bender(not many around).
My way took me about 20mins including the welding!
www.techspec-aus.com.au
www.trackdaypro.com.au
www.trackdaypro.com.au