unfortunately made use of frame sliders :( now need help....
- zx14ninja
- Newbie
- Posts: 12
- Joined: Sun Oct 03, 2010 11:18 pm
- Bike: ZX14R
- State: Victoria
- Location: Victoria, Epping
- Contact:
unfortunately made use of frame sliders :( now need help....
Hey Guys,
Last night on a cruisy ride home from a friends house a lovely old couple decided to pull out in front of me (from being parked on the side of the road) then hit the brakes when they realistic i was there... anyway long story short me and my 3week old zx14 went sliding down the road (yes i managed to miss the car) after taking it home and not having the heart to look at her last night i have just done a quick inspection.... (left hand side only) front & side fairing, bar end, mirror, tail fairing, exhaust, taillight (??don't ask) stand spool and i think lever.... some bits where aftermarket like the bar ends spools etc so i can just replace them with the factory items for now and i have sourced a cheap fairing (full set) brand new, as well as my brocks alien head exhaust which was already on the way.... now for my PROBLEM.... the valter moto frame sliders took an amazing amount of the damage as the above mentioned are all just cosmetically damaged grazed etc and the bike is still straight and rides exactly the same (good job valter moto!! definitely recommended).... anyway where the frame slider screws into the engine mount or whatever that bit is apart of, has broken... i wanted to know before i start pulling the fairing and everything off and have a heart attack how easy is that to fix/replace?? is it expensive?? is it alot of work??
Please any advice or opinion would be greatly appreciated!!
also if by any chance anyone knows where i can get any of the above mentioned parts eg. fairing or some nice mirrors please let me know.
THANK YOU
Last night on a cruisy ride home from a friends house a lovely old couple decided to pull out in front of me (from being parked on the side of the road) then hit the brakes when they realistic i was there... anyway long story short me and my 3week old zx14 went sliding down the road (yes i managed to miss the car) after taking it home and not having the heart to look at her last night i have just done a quick inspection.... (left hand side only) front & side fairing, bar end, mirror, tail fairing, exhaust, taillight (??don't ask) stand spool and i think lever.... some bits where aftermarket like the bar ends spools etc so i can just replace them with the factory items for now and i have sourced a cheap fairing (full set) brand new, as well as my brocks alien head exhaust which was already on the way.... now for my PROBLEM.... the valter moto frame sliders took an amazing amount of the damage as the above mentioned are all just cosmetically damaged grazed etc and the bike is still straight and rides exactly the same (good job valter moto!! definitely recommended).... anyway where the frame slider screws into the engine mount or whatever that bit is apart of, has broken... i wanted to know before i start pulling the fairing and everything off and have a heart attack how easy is that to fix/replace?? is it expensive?? is it alot of work??
Please any advice or opinion would be greatly appreciated!!
also if by any chance anyone knows where i can get any of the above mentioned parts eg. fairing or some nice mirrors please let me know.
THANK YOU
10 ZX14
- Yoshi TRC System.
- PC5.
- K&N FIlter.
- 16T Front Sprocket.
- Flies out.
- Fender elim.
- Wheels done black with red pin striping.
- Anodised billet preload adjusters, bar ends,etc.
- Carbon mirriors.
- Black DB screen.
- Heaps more s#@t...
- Yoshi TRC System.
- PC5.
- K&N FIlter.
- 16T Front Sprocket.
- Flies out.
- Fender elim.
- Wheels done black with red pin striping.
- Anodised billet preload adjusters, bar ends,etc.
- Carbon mirriors.
- Black DB screen.
- Heaps more s#@t...
- smithy5
- VIP MEMBER
- Posts: 3467
- Joined: Wed Oct 15, 2008 11:37 am
- Bike: Scooter
- State: New South Wales
- Location: Kurrajong, NSW
Re: unfortunately made use of frame sliders :( now need help
Why aren't the lovely old couple paying for this
Get onto their insurance company and restore your bike with brand spanken new OEM parts........
or get onto your insurer and they will chase them if you can identify them


Get onto their insurance company and restore your bike with brand spanken new OEM parts........
or get onto your insurer and they will chase them if you can identify them
2013 Triumph Thunderbird 1700 Storm
Suzuki 1300 LillBusa Ute
Serviced by Allfixed Automotive Castle Hill PH: (02) 9634 1455
SRT Survivor & Oficial Photographer
Suzuki 1300 LillBusa Ute
Serviced by Allfixed Automotive Castle Hill PH: (02) 9634 1455
SRT Survivor & Oficial Photographer
- zx14ninja
- Newbie
- Posts: 12
- Joined: Sun Oct 03, 2010 11:18 pm
- Bike: ZX14R
- State: Victoria
- Location: Victoria, Epping
- Contact:
Re: unfortunately made use of frame sliders :( now need help
lovely old couple has insurance and have contacted there insurance to make a "report" but the insurance company keep telling me the old man has to ring back and make a "claim" which he is starting to seem reluctant to do seeing as he has realised its my word against his........ i was really hoping no one would mention it (because im an idiot) but i do not have insurance and cant have insurance till january 2011 (dont ask)....
10 ZX14
- Yoshi TRC System.
- PC5.
- K&N FIlter.
- 16T Front Sprocket.
- Flies out.
- Fender elim.
- Wheels done black with red pin striping.
- Anodised billet preload adjusters, bar ends,etc.
- Carbon mirriors.
- Black DB screen.
- Heaps more s#@t...
- Yoshi TRC System.
- PC5.
- K&N FIlter.
- 16T Front Sprocket.
- Flies out.
- Fender elim.
- Wheels done black with red pin striping.
- Anodised billet preload adjusters, bar ends,etc.
- Carbon mirriors.
- Black DB screen.
- Heaps more s#@t...
- Damon Z1000
- KSRC Contributor
- Posts: 1617
- Joined: Sun Oct 10, 2004 4:13 pm
- Bike: Z1000
- State: New South Wales
- Location: Bligh Park NSW
Re: unfortunately made use of frame sliders :( now need help
Fark ZX14 and 'no' insurance!
Lot of $$$ to risk.
I know one young man who had a ZX9R and didn't have full insurance but had the sense to invest in some 3rd party only, it was well worth it
and the bike wasn't that expensive and I could afford to loose it
If you have an engine lug broken and all that fairing damage I'm sure it would be written off, keep pushing their insurance.
Witnesses?
Lot of $$$ to risk.
I know one young man who had a ZX9R and didn't have full insurance but had the sense to invest in some 3rd party only, it was well worth it


If you have an engine lug broken and all that fairing damage I'm sure it would be written off, keep pushing their insurance.
Witnesses?
Watch This Space.......I Told You Didn't I?
Officially Honoury Member NWSHCIAVANEWFARKINBIKE 2009.
Team Crash 2010 Ooooops
Officially Honoury Member NWSHCIAVANEWFARKINBIKE 2009.
Team Crash 2010 Ooooops
- un_majstk
- KSRC Member
- Posts: 267
- Joined: Tue Sep 08, 2009 9:43 pm
- Bike: Honda
- State: New South Wales
- Location: Green Valley
Re: unfortunately made use of frame sliders :( now need help
get the professionals involved quick i reckon.
lawyers fee should be covered by him if/when his insurer has to settle.
lawyers fee should be covered by him if/when his insurer has to settle.
- zx14ninja
- Newbie
- Posts: 12
- Joined: Sun Oct 03, 2010 11:18 pm
- Bike: ZX14R
- State: Victoria
- Location: Victoria, Epping
- Contact:
Re: unfortunately made use of frame sliders :( now need help
yeah there was a girl witness behind me she stopped to see if i was ok as well and to offer me some water, she also wrote her details on a shopping docket or something like that..... i might give her a call.... so engine mount lug broken write off??
10 ZX14
- Yoshi TRC System.
- PC5.
- K&N FIlter.
- 16T Front Sprocket.
- Flies out.
- Fender elim.
- Wheels done black with red pin striping.
- Anodised billet preload adjusters, bar ends,etc.
- Carbon mirriors.
- Black DB screen.
- Heaps more s#@t...
- Yoshi TRC System.
- PC5.
- K&N FIlter.
- 16T Front Sprocket.
- Flies out.
- Fender elim.
- Wheels done black with red pin striping.
- Anodised billet preload adjusters, bar ends,etc.
- Carbon mirriors.
- Black DB screen.
- Heaps more s#@t...
- smithy5
- VIP MEMBER
- Posts: 3467
- Joined: Wed Oct 15, 2008 11:37 am
- Bike: Scooter
- State: New South Wales
- Location: Kurrajong, NSW
Re: unfortunately made use of frame sliders :( now need help
Ring the coppers and make a report (in NSW it's PAL 131 444) the insurance company will want it. Then keep onto the old couple and get them to claim on their insurance. Tell them you spoke to the coppers and the witness, etc, etc etc... and the witness is willing to go to court etc..... Keep the pressure on them, cause yes, it's a very expensive fix or a write off......zx14ninja wrote:yeah there was a girl witness behind me she stopped to see if i was ok as well and to offer me some water, she also wrote her details on a shopping docket or something like that..... i might give her a call.... so engine mount lug broken write off??
I reckon you might have a different opinion of the lovely old couple in a little while

2013 Triumph Thunderbird 1700 Storm
Suzuki 1300 LillBusa Ute
Serviced by Allfixed Automotive Castle Hill PH: (02) 9634 1455
SRT Survivor & Oficial Photographer
Suzuki 1300 LillBusa Ute
Serviced by Allfixed Automotive Castle Hill PH: (02) 9634 1455
SRT Survivor & Oficial Photographer
- zx14ninja
- Newbie
- Posts: 12
- Joined: Sun Oct 03, 2010 11:18 pm
- Bike: ZX14R
- State: Victoria
- Location: Victoria, Epping
- Contact:
Re: unfortunately made use of frame sliders :( now need help
thanks smithy "lovely old couple" was meant with sarcasm haha
i rang the old man again today and told him to either ring his insurance company tomorrow and make the claim or he would be receiving a letter of demand from a solicitor along with a quote, police report (which i will go and get done tonight). i have spoken to the lady that was driving behind me and saw the accident, she said she is more than happy to come to court if it has to which is good. he also said i was "probably" speeding and all this other bulls#*@ so i called his insurance company and they said he can say i was doing 300km/h and it wouldn't stand up in a claim or court if it gets to that.
the guy i spoke to from his insurance company was actually astonished how stupid the old man is and why he didn't just pay his excess and get it over with... he said people occasionally pull these sort of stunts when the other party (me) don't have insurance because they think no insurance no defense.... little does he know if he doesn't claim and it goes to court his insurance company will not cover anything including my bike his legal and my legal fees... it was reassuring when someone from his insurance company looking at his report said he doesn't really have much of a chance of wiggling his way out no matter what way it goes.
i was looking at all these parts etc just to know what sort of damage there is.... ps i found out that engine mount that snapped is $79 and about 20minute job nothing major
so hopefully if old man pulls his head out of his arrr.se it should be sorted soon otherwise it will be a long haul to the magistrate....
i rang the old man again today and told him to either ring his insurance company tomorrow and make the claim or he would be receiving a letter of demand from a solicitor along with a quote, police report (which i will go and get done tonight). i have spoken to the lady that was driving behind me and saw the accident, she said she is more than happy to come to court if it has to which is good. he also said i was "probably" speeding and all this other bulls#*@ so i called his insurance company and they said he can say i was doing 300km/h and it wouldn't stand up in a claim or court if it gets to that.
the guy i spoke to from his insurance company was actually astonished how stupid the old man is and why he didn't just pay his excess and get it over with... he said people occasionally pull these sort of stunts when the other party (me) don't have insurance because they think no insurance no defense.... little does he know if he doesn't claim and it goes to court his insurance company will not cover anything including my bike his legal and my legal fees... it was reassuring when someone from his insurance company looking at his report said he doesn't really have much of a chance of wiggling his way out no matter what way it goes.
i was looking at all these parts etc just to know what sort of damage there is.... ps i found out that engine mount that snapped is $79 and about 20minute job nothing major

10 ZX14
- Yoshi TRC System.
- PC5.
- K&N FIlter.
- 16T Front Sprocket.
- Flies out.
- Fender elim.
- Wheels done black with red pin striping.
- Anodised billet preload adjusters, bar ends,etc.
- Carbon mirriors.
- Black DB screen.
- Heaps more s#@t...
- Yoshi TRC System.
- PC5.
- K&N FIlter.
- 16T Front Sprocket.
- Flies out.
- Fender elim.
- Wheels done black with red pin striping.
- Anodised billet preload adjusters, bar ends,etc.
- Carbon mirriors.
- Black DB screen.
- Heaps more s#@t...
- mike-s
- Apprentice Post Whore :-)
- Posts: 6142
- Joined: Sat Aug 07, 2004 5:43 am
- Bike: Suzuki
- State: New South Wales
- Location: Arncliffe, Sydney
- Contact:
Re: unfortunately made use of frame sliders :( now need help
All i can say is thank God you got a witness, that was your only salvation.
Next up after this headache is sorted, get 3rd party property if you can't afford comprehensive.
Next up after this headache is sorted, get 3rd party property if you can't afford comprehensive.
- Saki
- KSRC Contributor
- Posts: 2167
- Joined: Wed Feb 22, 2006 5:59 pm
- Bike: ZX10R
- State: Western Australia
Re: unfortunately made use of frame sliders :( now need help
hey mate,
i agree, it is their fault they caused you to crash, hence they are responsible.
They obviously dont want to do the "right" thing and stand up and admit they did the wrogn thing, its pretty clear from them trying to blame you.
Keep on at them, it could be a tad bit unpleasant. But fuck them im sure if the roll was reserved they more than certainly be coming after you.
Also just cause you have no insurance doesnt mean you have no defence at all! Go get em tiger, i wanna see a new ZX14
i agree, it is their fault they caused you to crash, hence they are responsible.
They obviously dont want to do the "right" thing and stand up and admit they did the wrogn thing, its pretty clear from them trying to blame you.
Keep on at them, it could be a tad bit unpleasant. But fuck them im sure if the roll was reserved they more than certainly be coming after you.
Also just cause you have no insurance doesnt mean you have no defence at all! Go get em tiger, i wanna see a new ZX14

ZX-2R '88 -> ZX636 '06 -> ZX-9R '99 -> ZX-10R '04 -> Z1000 '03 -> ZX-10R '04 -> ZX-10R '08
- waynemorgan
- KSRC Contributor
- Posts: 1989
- Joined: Sun Aug 31, 2008 4:36 pm
- Bike: ZZR600
- State: New South Wales
- Location: Penrith NSW Australia
Re: unfortunately made use of frame sliders :( now need help
Bummer about the off but yeah - keep the pressure on to get everything fixed!
I don't like the term insane - I prefer mentally hilarious!
- seiko1
- Apprentice Post Whore :-)
- Posts: 7643
- Joined: Wed Jan 14, 2009 8:36 pm
- Bike: ZX14R
- State: Victoria
- Location: Geelong
Re: unfortunately made use of frame sliders :( now need help
Damn....another one I missed...WTF
I know a good panel beater in Melb ninja boy

I know a good panel beater in Melb ninja boy

Policy - Find something simple.....and Complicate it!
-
- Warming up
- Posts: 56
- Joined: Wed Feb 27, 2008 5:59 pm
- Bike: ZX12R
- State: Queensland
- Location: Brisbane
Re: unfortunately made use of frame sliders :( now need help
It amazes me how people can change the past in their mind to suit them, especially when cash is involved.
Hope it all pans out in your favour. Got any pics of the damage?
Happens too often people changing lanes or pulling out.. THEN looking
Hope it all pans out in your favour. Got any pics of the damage?
Happens too often people changing lanes or pulling out.. THEN looking

ZIGZAG
- zx14ninja
- Newbie
- Posts: 12
- Joined: Sun Oct 03, 2010 11:18 pm
- Bike: ZX14R
- State: Victoria
- Location: Victoria, Epping
- Contact:
Re: unfortunately made use of frame sliders :( now need help
i rang the couple who came out and gave me a hand getting up and off the road... i asked him if it was ok to pass on his details to the police for the report because the old coksuka is trying to screw me.... all he said was they admitted fault in front of him and if he gets a phone call from the police he will tell them exactly that! i cant believe it for a a couple hundred dollars worth of excess he is trying to get away with it... im telling you boys now if he even attempts to screw me any further ill rip him a new asshole....
dropped the bike off at k&j thomas today to get it quoted up the old coksuka wants a quote that he will "apparently" send to his insurance company even though he has not yet made a claim.... i hope this doesnt end up in a courtroom but i will sue the piece of shitt if i have to....
dropped the bike off at k&j thomas today to get it quoted up the old coksuka wants a quote that he will "apparently" send to his insurance company even though he has not yet made a claim.... i hope this doesnt end up in a courtroom but i will sue the piece of shitt if i have to....
10 ZX14
- Yoshi TRC System.
- PC5.
- K&N FIlter.
- 16T Front Sprocket.
- Flies out.
- Fender elim.
- Wheels done black with red pin striping.
- Anodised billet preload adjusters, bar ends,etc.
- Carbon mirriors.
- Black DB screen.
- Heaps more s#@t...
- Yoshi TRC System.
- PC5.
- K&N FIlter.
- 16T Front Sprocket.
- Flies out.
- Fender elim.
- Wheels done black with red pin striping.
- Anodised billet preload adjusters, bar ends,etc.
- Carbon mirriors.
- Black DB screen.
- Heaps more s#@t...
- smithy5
- VIP MEMBER
- Posts: 3467
- Joined: Wed Oct 15, 2008 11:37 am
- Bike: Scooter
- State: New South Wales
- Location: Kurrajong, NSW
Re: unfortunately made use of frame sliders :( now need help
WOWsmithy5 wrote:I reckon you might have a different opinion of the lovely old couple in a little while


2013 Triumph Thunderbird 1700 Storm
Suzuki 1300 LillBusa Ute
Serviced by Allfixed Automotive Castle Hill PH: (02) 9634 1455
SRT Survivor & Oficial Photographer
Suzuki 1300 LillBusa Ute
Serviced by Allfixed Automotive Castle Hill PH: (02) 9634 1455
SRT Survivor & Oficial Photographer