Is anybody running them on the track ? If so, what pads are you using ?
Cheers,
Brian
Cast iron discs
-
greenman43
- KSRC Regular
- Posts: 675
- Joined: Fri May 06, 2005 10:01 pm
- Bike: ZX6R
- State: New South Wales
- Location: Brooklyn NSW
- Contact:
Cast iron discs
07 ZX10R track 09 ZX6R road/track 93 ZXR750 race 89 GPZ900 project
Do not walk behind me, for I may not be leading
Do not walk in front of me, for I may not be following
Do not walk alongside me, for the path may be narrow
Just piss off and leave me alone
Do not walk behind me, for I may not be leading
Do not walk in front of me, for I may not be following
Do not walk alongside me, for the path may be narrow
Just piss off and leave me alone
-
zxsixr03
- KSRC Regular
- Posts: 896
- Joined: Mon Jan 24, 2005 7:04 pm
- Bike: ZX6R
- State: New South Wales
- Location: Sydney
Re: Cast iron discs
Yes i use the braketech cast iron discs
I was recommend to run the Ferodo CP211 carbon ceramic pads, very good pads but do need regualar up keep to keep them working well.
http://www.braketech.com/index.php?opti ... &Itemid=92
Or these...
http://www.braketech.com/index.php?opti ... &Itemid=90
I was recommend to run the Ferodo CP211 carbon ceramic pads, very good pads but do need regualar up keep to keep them working well.
http://www.braketech.com/index.php?opti ... &Itemid=92
Or these...
http://www.braketech.com/index.php?opti ... &Itemid=90
Built by craftsman, Designed by a genius, Ridden by a twat....
-
greenman43
- KSRC Regular
- Posts: 675
- Joined: Fri May 06, 2005 10:01 pm
- Bike: ZX6R
- State: New South Wales
- Location: Brooklyn NSW
- Contact:
Re: Cast iron discs
Thanks very much, upkeep as in ... ?zxsixr03 wrote:Yes i use the braketech cast iron discs
I was recommend to run the Ferodo CP211 carbon ceramic pads, very good pads but do need regualar up keep to keep them working well.
http://www.braketech.com/index.php?opti ... &Itemid=92
Or these...
http://www.braketech.com/index.php?opti ... &Itemid=90
Cheers,
Brian
07 ZX10R track 09 ZX6R road/track 93 ZXR750 race 89 GPZ900 project
Do not walk behind me, for I may not be leading
Do not walk in front of me, for I may not be following
Do not walk alongside me, for the path may be narrow
Just piss off and leave me alone
Do not walk behind me, for I may not be leading
Do not walk in front of me, for I may not be following
Do not walk alongside me, for the path may be narrow
Just piss off and leave me alone
-
zxsixr03
- KSRC Regular
- Posts: 896
- Joined: Mon Jan 24, 2005 7:04 pm
- Bike: ZX6R
- State: New South Wales
- Location: Sydney
Re: Cast iron discs
Just scouring the pads on some emery paper to stop them glazing...
If i did it again and when i need new pads i will go with the second link...
The slightest bit of moisture in the air causes the fresh rotor surface to rust and oxidise, don't even think of riding in the rain or trailering on open trailer if wet...
If i did it again and when i need new pads i will go with the second link...
The slightest bit of moisture in the air causes the fresh rotor surface to rust and oxidise, don't even think of riding in the rain or trailering on open trailer if wet...
Built by craftsman, Designed by a genius, Ridden by a twat....
-
greenman43
- KSRC Regular
- Posts: 675
- Joined: Fri May 06, 2005 10:01 pm
- Bike: ZX6R
- State: New South Wales
- Location: Brooklyn NSW
- Contact:
Re: Cast iron discs
Gotcha, thanks very much. I've had this type of disc before on my old ZXR, and they certainly weren't a pretty sight after a touch of rain ...
Cheers,
Brian
Cheers,
Brian
07 ZX10R track 09 ZX6R road/track 93 ZXR750 race 89 GPZ900 project
Do not walk behind me, for I may not be leading
Do not walk in front of me, for I may not be following
Do not walk alongside me, for the path may be narrow
Just piss off and leave me alone
Do not walk behind me, for I may not be leading
Do not walk in front of me, for I may not be following
Do not walk alongside me, for the path may be narrow
Just piss off and leave me alone