Will it fit???? Ohlins?

[Baddie]

a friend of mine was offered a Ohlins TTx 36 (H0789) from his cbr 600 2007/08?

Question is will it fit a 08+ zx10r?

[Wattie]

ask Zeno...

[Baddie]

I have....waiting for reply

[EDU]

He might be able to make it fit but they're definitely different part #s

[Baddie]

Yes it does fit.... but the cost to retro fit doesnt make it worth it.

[Blurr]

yep the CBR llinkage is totoally different. At least if you buy one off zeno he set the spring and valves up for you

[MadKaw]

The 08 cbr600 ohlins is 295mm long
The 08 zx10r ohlins is 338mm long

Google is you friend..
http://www.ohlins-suspension.co.uk/Ohli ... onList.pdf

[zenodamper]

Aye, I'll answer this so others know why it is troublesome for future reference...

Parts needed & most will be above 100 dollars BTW, if not nearer 2...:-

1) Body cap has a different shape - Unit Pro-link sw-arm = different.

2) Machine different bearings for top section (width) - parts and or time in labour...

3) replace bottom eye with clevis type fitment

4) shaft length

5) inner tube (twin tube is what the TT in TTX means; doubled barreled i.e.)

6) outer tube

7) stop spring & likely a main spring

[Wattie]

basicly everything except the oil and adjusting knobs

[zenodamper]

nah, I wouldn't try and catch the oil from it a sit falls into pieces, too hard!

besides, once the yellow heat can gets on it, u don't want anything oily in there as it might go bang

[Baddie]

What about a 06/07 zx10r ohlins shock fit into a 2010 zx10r?

[Blurr]

Same shock length but would still have different internal set up if I guess correctly