Gday
-
Tilley1991
- Newbie
- Posts: 24
- Joined: Fri Feb 25, 2011 1:15 pm
- Bike: ZX2R
- State: New South Wales
Gday
Hey guys, i think the bike is going to be ride ready come 3:30 today, which is very exciting
now i need to put my fairing kit on, pick up a few small things here and there, and buy an exhaust now the question i was going to ask, what brand name exhaust would be best suited for a ZXR250C, i want something that sounds nice, looks the part and hopefully has some gain to it, now id prefer a carbon fibre but anything that looks great il consider
its going to be on a Tyga kit thats painted black.
- Deanoseadog
- Warming up

- Posts: 80
- Joined: Sat Feb 26, 2011 2:10 pm
- Bike: Other Kawi
- State: New South Wales
- Location: Newcastle
Re: Gday
Straight Pipe! Preferably slash cut just behind the swingarm pivot. Or if you're worried about the noise put a little GP style tapered can on it. 
-
Tilley1991
- Newbie
- Posts: 24
- Joined: Fri Feb 25, 2011 1:15 pm
- Bike: ZX2R
- State: New South Wales
Re: Gday
Where would i go about the acquisition of one of these?
- Deanoseadog
- Warming up

- Posts: 80
- Joined: Sat Feb 26, 2011 2:10 pm
- Bike: Other Kawi
- State: New South Wales
- Location: Newcastle
Re: Gday
Where all good bike builders "in the know" go.......Ebay
Unless you want the slash cut pipe...then you can get one at bunnings for about $15. It comes packaged as a 4" angle grinder.....but don't let that put you off.
Unless you want the slash cut pipe...then you can get one at bunnings for about $15. It comes packaged as a 4" angle grinder.....but don't let that put you off.
-
Tilley1991
- Newbie
- Posts: 24
- Joined: Fri Feb 25, 2011 1:15 pm
- Bike: ZX2R
- State: New South Wales
Re: Gday
lmao thanks guys