De- tailing

For general Technical and Performance Discussions
User avatar
Colette
Team Cougar
Posts: 3089
Joined: Thu Apr 22, 2004 10:20 am
Bike: ZX6R
State: New South Wales

De- tailing

Post by Colette »

What are the benefits to cutting the tail end off the rear plastic thingy (technical term ;) ) on your bike?

Aside from the cosmetic change in appearance, what are the benefits, if any?

Also, would this be worth doing on a ZZR 600?

Thanks,
Colette
Barrabob
KSRC Contributor
KSRC Contributor
Posts: 1882
Joined: Sat Sep 18, 2004 11:00 am
Location: Brisbane

re: De- tailing

Post by Barrabob »

On hot summer days when you are getting stuck into it on a chip seal road you will be able to spray hot rocks at the bikes trying to catch you :D .

Its a cosmetic thing the fender is there to stop rocks and assorted debris being spat out the back at cars and such but in a lot of cases it looks damn ugly so we remove it and fit a little bracket for the nuber plate and indicaters.

Have seen the stock fender wobbling around at track days but you cant see it if your sitting on top of the bike. :D :D
If I rode my bike at the speed of light, what would happen when I switched on its headlights?

Image
mattyv74
Team Kitty Litter
Posts: 658
Joined: Sun May 02, 2004 3:13 pm
Bike: ZX7R
State: Queensland
Location: Toowoomba

re: De- tailing

Post by mattyv74 »

Hey hey, check out Karen's (miss zzr) fendorectomy thread. Cant find the addy, but some one on here will.
She did it to her zzr6 and it looks trick :wink:
Last edited by mattyv74 on Thu May 12, 2005 12:39 pm, edited 1 time in total.
It is far better to dare mighty things, to win glorious triumphs, even if chequered with failure, than to take rank with those who neither enjoy much nor suffer much, as they live in grey twilight that knows no victory nor defeat.
User avatar
Colette
Team Cougar
Posts: 3089
Joined: Thu Apr 22, 2004 10:20 am
Bike: ZX6R
State: New South Wales

re: De- tailing

Post by Colette »

Thanks for that Bob and ta also Matty - I didn't realise Karen had done hers.

If anyone locates the thread, please post it.
User avatar
aardvark
Apprentice Post Whore :-)
Apprentice Post Whore :-)
Posts: 5766
Joined: Wed Apr 07, 2004 6:45 pm
Bike: Yamaha
State: South Australia
Location: Adelaide, S.A.
Contact:

re: De- tailing

Post by aardvark »

Try here:
http://www.ksrc-au.com/html/zzr_fenderectomy.html

I haven't done my bike, because personally, it gives me the shits following people who have done it...
User avatar
Nanna10r
Team Ninja
Posts: 4291
Joined: Wed Jul 14, 2004 10:42 pm
Bike: ZX10R
State: Queensland
Location: Brisbane Australia

re: De- tailing

Post by Nanna10r »

The ugly big fender wil stop some stuff being tossed at those behind you n will also stop Dirt n junk being thrown up on the tailight n rear ducktail top when you ride over roadworks. But they look ugly n hide the Rear tyre imo. Chop it off Colette. :wink: Even a coupla inches will look better n still give some protection.
Cheers Brett
"Nan & Pop Racing"
Poppy Hops on .... CBR150 (Superlite) CBR954 "Blade"
Nanna Naps on .... MoriWAKI NSR85 (Motolite) ZX10R "Crim"
We may ride like Old Can'ts, But Phuk we look DOOG !!!!!!
User avatar
Colette
Team Cougar
Posts: 3089
Joined: Thu Apr 22, 2004 10:20 am
Bike: ZX6R
State: New South Wales

re: De- tailing

Post by Colette »

Is that an offer to help me with it when you come to Sydney, Brett? ;)
JamesLaugesen
KSRC Member
KSRC Member
Posts: 231
Joined: Fri Apr 08, 2005 8:42 am
Location: Wahroonga, Sydney, NSW, Australia.
Contact:

re: De- tailing

Post by JamesLaugesen »

I just did my ZXR, photos online soon so I'll chuck 'em on here. No photos of the "prcedure" though. It's very simple.

Happy to give you a hand if you want Collette.

QuinDaddy (a previous KSRC member... now owns a Hooo... honn... yeah ;)) and I are planning another one of our many "tinkering days" soon.
Will be at his massive bike-friendly house in Turrumurra; park the bikes inside the house - pretty close to heavan :D Hahaha.
Anyway, if you wanted to join us for some tinkering you're more than welcome.

Will head up the old road for a quick blurt too.

James
ZXR"900" - In pieces... again.
Another engine gone but at least the purple and pink are still there, oh yeah.
User avatar
Colette
Team Cougar
Posts: 3089
Joined: Thu Apr 22, 2004 10:20 am
Bike: ZX6R
State: New South Wales

re: De- tailing

Post by Colette »

Sounds good to me, James! Will PM you my contact details.

Hahaha, hope it's not going to be like the plastic surgery bug, where you go in to get one thing done and end up doing a whole number of extra procedures!! :shock:
User avatar
javaman
VIP MEMBER
VIP MEMBER
Posts: 2473
Joined: Sun Nov 21, 2004 8:39 pm
Bike: GPz900
State: Victoria
Location: Bonbeach, VIC

re: De- tailing

Post by javaman »

Resale price will be better with the fender I reckon ...

I like my fender.
alien.gif andi - Red GPZ900R, GPZ750R1, KLR650 Tengai, KLR250
"my dad's motorbike is cool it is all ways clean.oheter pepole' s motorbikes
are't like my dad's one it's because their is one not always clean."
-ariel circa 2007
http://GPZninja.blogspot.com/
User avatar
Neka79
Extreme Post Whore :-)
Extreme Post Whore :-)
Posts: 13115
Joined: Fri Apr 23, 2004 12:20 am
Bike: Z900
State: South Australia
Location: Adelaide......nah its cool..no really!!
Contact:

re: De- tailing

Post by Neka79 »

but remember..wen it rains ur bike will get coated in mud & roadgrime!!...mine is always filthy at the back cos i cut it so short...also not good for burnouts-rubber goes everywhere...looks trick tho...
Neka
2006 Zeddy 1000
1996 VS series 2 S pak Ute
Image
JamesLaugesen
KSRC Member
KSRC Member
Posts: 231
Joined: Fri Apr 08, 2005 8:42 am
Location: Wahroonga, Sydney, NSW, Australia.
Contact:

re: De- tailing

Post by JamesLaugesen »

Does it really make that much difference Neka? I've never noticed.
Most bikes seem to have the fender too high, almost inline with the rear of the wheel which -by the look of it- would only really stop stuff from flicking up _past_ the back of the bike, not onto the tail.
Only bikes I've seen that really have a realistic rear fender are some of the Buels, BMWs, etc.
ZXR"900" - In pieces... again.
Another engine gone but at least the purple and pink are still there, oh yeah.
User avatar
ty
Team Ninja
Posts: 2869
Joined: Thu Apr 22, 2004 9:24 am
Bike: Honda
State: New South Wales
Location: Gosford
Contact:

Re: re: De- tailing

Post by ty »

neka79 wrote:but remember..wen it rains ur bike will get coated in mud & roadgrime!!...mine is always filthy at the back cos i cut it so short...also not good for burnouts-rubber goes everywhere...looks trick tho...
My stock fender goes pretty low - and I still get the back filthy when it rains - goes up and inside the rain cover too.
So I'd doubt it'd make any difference.
I don't think it makes any difference with rocks etc either. Any rocks that hit me when I'm behind another rider have come up from near the bottom of the tyre, where any fender has no effect, not from half way up the tyre where a fender might.
ty
If you have no fear, you're not going fast enough.
Never argue with an idiot. He'll drag you down to his level, then beat you with experience.
icebreaker
Administrator
Administrator
Posts: 2795
Joined: Wed Apr 07, 2004 7:07 pm
Bike: Z1000
State: Tasmania
Location: Hobart
Contact:

Re: re: De- tailing

Post by icebreaker »

javaman wrote:Resale price will be better with the fender I reckon ...

I like my fender.
yes and no.. You've hacked it.. it's no longer original.. which means it's upto the buyer as too whether they want that, because to reverse it means a whole new under tale section (the plack plastic lining i mean)

I cut mine, didn't care either way. and most people who do it don't care,
and a for the buyer well a more attractive bike can aid sale, but it goes both ways, some people want a bike in original condition. I figure it's split down the middle either way. Hotted up/Stock, there's a market there either way.

Dan
Ducati Monster S2R1000
Kawasaki '77 Z1000A1, '76 z900 (Project) & '78 Z1000A2 (Project)

http://www.unihost.com.au - Affordable, Reliable Webhostng
User avatar
Neka79
Extreme Post Whore :-)
Extreme Post Whore :-)
Posts: 13115
Joined: Fri Apr 23, 2004 12:20 am
Bike: Z900
State: South Australia
Location: Adelaide......nah its cool..no really!!
Contact:

re: De- tailing

Post by Neka79 »

ok..by law the tail piece is MEANT to extend past the wheel-looking at it side on..so its the furthermost part of the bike at the back..if that makes sense...
if uve seen mine, i cut mine right off-looks like no undertail-and ever since i cut it off it made a huge difference to how much mess i get on my ductail..not that it didnt do it b4, but its worse...just thought id bring it up...
Neka
2006 Zeddy 1000
1996 VS series 2 S pak Ute
Image
Post Reply