!!! FI light keeps coming on !!!

Gazza · Post by **Gazza** » Mon Jan 30, 2012 8:11 am

My Crim's FI light keeps coming on and im a bit concerned.
It hasn't lost power at all and runs exactly as it should but the light stays on now.
It happened to me a little while ago but i put it down to bad fuel but the last
couple of times ive been out for a ride it comes on amd stays on.

Any help as to what could be the problem & how to fix it would be
a great help.
Thanx in advance.

Post by **Wattie** » Mon Jan 30, 2012 8:28 am

Exhaust valve working?

There is a way to check the codes somehow...

Gazza · Post by **Gazza** » Mon Jan 30, 2012 11:08 am

Wattie wrote:Exhaust valve working?

There is a way to check the codes somehow...

I have a full akro system on it , so would there even be an exaust valve on it ?
or is it the black box with the hex looking nut that turns when you
turn the bike on ?

Gazza · Post by **Gazza** » Mon Jan 30, 2012 11:10 am

Under the rear seat.

Glen · Post by **Glen** » Mon Jan 30, 2012 11:25 am

That's it. Has the light come on since you put the Akra on?

You normally stick a little doovey on instead of the hex thingy to stop it rotating and it tricks it into thinking the exhaust valve is still there

Post by **Wattie** » Mon Jan 30, 2012 11:29 am

The box may be dead. Happened in robracers 6.
If the code says its that, then get a servo buddy and get rid of the servo.

Yeah it's the hex thing under the seat.

Gazza · Post by **Gazza** » Mon Jan 30, 2012 11:35 am

Ok ill check it out this arvo.

greenmeanie · Post by **greenmeanie** » Mon Jan 30, 2012 5:00 pm

http://www.servobuddy.com/Kawasaki-Servo-Buddy_p_8.html

Gazza · Post by **Gazza** » Mon Jan 30, 2012 9:50 pm

Servo is the problem, just checked it and its jamed up but if I turn it by hand it will work but not by itself.

thanx for the advise and help guys

much appreciated.
Have already ordered a Servobuddy from the website you put up greenmeanie cheers mate

hoffy · Post by **hoffy** » Mon Jan 30, 2012 10:38 pm

See money fixes all !

Gazza · Post by **Gazza** » Mon Feb 20, 2012 5:39 am

FI light problem solved.
Servo buddy installed and tested @ the old rd race track

Yesterday and has been tried & test under the most extreem of condition.
Now i have an error free crim once more.
Thanx to all who steered me in the right direction as to the problem

greenmeanie · Post by **greenmeanie** » Mon Feb 20, 2012 10:12 am

Excellent.

Phil · Post by **Phil** » Sat Mar 03, 2012 6:29 pm

Gazza wrote:FI light problem solved.
Servo buddy installed and tested @ the old rd race track
Yesterday and has been tried & test under the most extreem of condition.
Now i have an error free crim once more.
Thanx to all who steered me in the right direction as to the problem

I'd heard they were unrelaible those Crims

Post by **robracer** » Sat Mar 03, 2012 6:32 pm

Servobuddy is fantastic

Strika · Post by **Strika** » Sat Mar 03, 2012 6:47 pm

Yeah, I had that problem with one of my bikes. I removed the globe!

Kawasaki Sportsbike Riders Club - Australia - Online Forum