FI Warning Light on my 10R

kypez · Post by **kypez** » Mon Jul 24, 2006 11:52 pm

Hey all,

while riding home tonight, the FI light came on and didnt go off while I was riding. I was wondering if anyone can tell me why this light came on and what to do to fix it.

Cheers,

kypez.

Rossi · Post by **Rossi** » Tue Jul 25, 2006 12:02 am

Lights on the 6,10,12 and I guess the 14 all have the same functions....they warn you when something has failed/been interrupted, it's a feature of the EFI unit
Grab your manual and see what it says in there, failing that there is usually a connection in the cable near the ECU that is tapped to earth 3 times and this causes the ecu to enter report mode..........the amount of times the lights on the dash flash relates to a specific fault but you will need the service manual for that

kypez · Post by **kypez** » Tue Jul 25, 2006 12:08 am

hope its nothing bad...

just ran out of warrenty last week...

cheers mate... will check it in the morning...

FrogZ · Post by **FrogZ** » Tue Jul 25, 2006 8:45 am

Have you frigged around with anything on it or is it totally standard.
For example if you frig with the KleenAir you will get the FI light to come on... What was the last thing you did B4 it appeared, ie. cleaned it, had the tank off etc.

Whenever something goes "wrong" ALWAYS go back to the thing YOU did last before it happened...

kypez · Post by **kypez** » Tue Jul 25, 2006 4:53 pm

havent done anything to the bike. Was riding in the rain last night on the way home. Well, light drizzle really. And the light just came on. I had not ridden the bike for 20 days or so...

Cant understand it. Its off to the dealer on Thursday, fingers crossed.

the kid · Post by **the kid** » Tue Jul 25, 2006 7:34 pm

Rossi wrote:Lights on the 6,10,12 and I guess the 14 all have the same functions....they warn you when something has failed/been interrupted, it's a feature of the EFI unit
Grab your manual and see what it says in there, failing that there is usually a connection in the cable near the ECU that is tapped to earth 3 times and this causes the ecu to enter report mode..........the amount of times the lights on the dash flash relates to a specific fault but you will need the service manual for that

Hey Rossi , does the ECU on my bike actuate the blue and red flashing lights that come on when I ride it

Can't find anything in the manual about it . Hope you can help .

Stereo · Post by **Stereo** » Tue Jul 25, 2006 8:33 pm

Happens on my wife's gixxer6 from time to time.... it doesnt seem to affect anything though.... after switching off/on the light is off again.... the bikes performance does not seem to be adversely affected by this light being on...

Neka79 · Post by **Neka79** » Tue Jul 25, 2006 8:48 pm

the kid wrote:
Rossi wrote:Lights on the 6,10,12 and I guess the 14 all have the same functions....they warn you when something has failed/been interrupted, it's a feature of the EFI unit
Grab your manual and see what it says in there, failing that there is usually a connection in the cable near the ECU that is tapped to earth 3 times and this causes the ecu to enter report mode..........the amount of times the lights on the dash flash relates to a specific fault but you will need the service manual for that
Hey Rossi , does the ECU on my bike actuate the blue and red flashing lights that come on when I ride it
Can't find anything in the manual about it . Hope you can help .

hey my bike comes with that feature also!!

mine seems to be triggered when u get hard on the gas, especially if the front wheel lifts a little bit...

kypez · Post by **kypez** » Tue Jul 25, 2006 9:23 pm

I downloaded the service manual last night. Will check it tonight when I get home if I can be bothered... too scared in all honesty to see what the code is logged as...

Rossi · Post by **Rossi** » Tue Jul 25, 2006 9:41 pm

the kid wrote:
Rossi wrote:Lights on the 6,10,12 and I guess the 14 all have the same functions....they warn you when something has failed/been interrupted, it's a feature of the EFI unit
Grab your manual and see what it says in there, failing that there is usually a connection in the cable near the ECU that is tapped to earth 3 times and this causes the ecu to enter report mode..........the amount of times the lights on the dash flash relates to a specific fault but you will need the service manual for that
Hey Rossi , does the ECU on my bike actuate the blue and red flashing lights that come on when I ride it
Can't find anything in the manual about it . Hope you can help .

Mine seems to have the same feature Billy apparently they are the providers of points...........collect enough and you get tram tickets for 3 months travel

the kid · Post by **the kid** » Tue Jul 25, 2006 9:45 pm

Neka79 wrote:
the kid wrote:
Rossi wrote:Lights on the 6,10,12 and I guess the 14 all have the same functions....they warn you when something has failed/been interrupted, it's a feature of the EFI unit
Grab your manual and see what it says in there, failing that there is usually a connection in the cable near the ECU that is tapped to earth 3 times and this causes the ecu to enter report mode..........the amount of times the lights on the dash flash relates to a specific fault but you will need the service manual for that
Hey Rossi , does the ECU on my bike actuate the blue and red flashing lights that come on when I ride it
Can't find anything in the manual about it . Hope you can help .
hey my bike comes with that feature also!!

mine seems to be triggered when u get hard on the gas, especially if the front wheel lifts a little bit...

Amazing Nek ! Same thing with mine , an the results are the same too . Just walk on bye