First Service

BladeBoy · Post by **BladeBoy** » Tue Dec 05, 2006 8:13 pm

Do you think $160 is the right cost?

Gosling1 · Post by **Gosling1** » Tue Dec 05, 2006 8:14 pm

for your Blade ??

hoffy · Post by **hoffy** » Tue Dec 05, 2006 8:33 pm

Mine was $99.00, oil itself is about $70.00.

Neka79 · Post by **Neka79** » Tue Dec 05, 2006 8:36 pm

1st service (at 1000km??) should be nothing more than Oil, Filter & a full inspection to make sure all bolts are tight, all cables working properly etc.... a safety check really...

i spose $160 isnt that bad ($5-60 for oil & filter i guess)

BladeBoy · Post by **BladeBoy** » Tue Dec 05, 2006 8:55 pm

Gosling1 wrote:for your Blade ??

Yes Gos, been 25 years since I have bought a brand spanker, just checking.

Gosling1 · Post by **Gosling1** » Tue Dec 05, 2006 9:36 pm

Ok, and this was the 1k service ? If so, as the boys have said, it *sounds* about right..........stuffed if I can remember what the 1k service on the 12 cost

They don't do much at this service except change oil and filter, and checklist a lot of things.........

Glen · Post by **Glen** » Wed Dec 06, 2006 7:40 am

At the first service you should ask them to take the restrictors out... oh that's right it's a Honda, that's as good as it goes..

BladeBoy · Post by **BladeBoy** » Wed Dec 06, 2006 8:53 am

Glen wrote:At the first service you should ask them to take the restrictors out... oh that's right it's a Honda, that's as good as it goes..

Thanks for the advice Glen

Johnnie5 · Post by **Johnnie5** » Wed Dec 06, 2006 3:51 pm

sounds about right

prob 1 hr labour , oil and filter

then the usual
workshop fee
enviromental levy
cause we feel like it charge

lol

change your own oil and filter then you should be paying for about 15 mins labour max

Post by **Wattie** » Wed Dec 06, 2006 4:20 pm

so can your rev it past 3k yet?? man i wanna be around for that!!!

i can see your face now

"FFFFFFFFARRK!!!""

BladeBoy · Post by **BladeBoy** » Wed Dec 06, 2006 5:15 pm

Wattie wrote:so can your rev it past 3k yet?? man i wanna be around for that!!!

i can see your face now
"FFFFFFFFARRK!!!""

Never had a rev limit on break in, so says the owners manual, just don't labour it

Note to Wattie: Front wheel will bounce up in fourth, ask Pabs

Post by **Wattie** » Wed Dec 06, 2006 5:29 pm

BladeBoy wrote:
Wattie wrote:so can your rev it past 3k yet?? man i wanna be around for that!!!

i can see your face now
"FFFFFFFFARRK!!!""
Never had a rev limit on break in, so says the owners manual, just don't labour it Note to Wattie: Front wheel will bounce up in fourth, ask Pabs

you let pabs ride it??

BladeBoy · Post by **BladeBoy** » Wed Dec 06, 2006 5:57 pm

Wattie wrote:
BladeBoy wrote:
Wattie wrote:so can your rev it past 3k yet?? man i wanna be around for that!!!

i can see your face now
"FFFFFFFFARRK!!!""
Never had a rev limit on break in, so says the owners manual, just don't labour it Note to Wattie: Front wheel will bounce up in fourth, ask Pabs
you let pabs ride it??

Funny

Stereo · Post by **Stereo** » Thu Dec 07, 2006 5:06 am

$160 is at the upper end of "normal"..... Las time I paid $145... the other prices I got were all around the 150-170 mark.....

one guy was $110..... so I didnt use him...