ZZR 250: Removing airbox snorkel

ZZR 250, 600, 1100 & 1200
Post Reply
PaulF
Newbie
Posts: 30
Joined: Tue Jan 29, 2008 10:10 pm
Bike: Ninja 250
State: New South Wales
Location: NSW

ZZR 250: Removing airbox snorkel

Post by PaulF »

Hey guys,
last week i was cleaning my air filter and forgot to put the air box snorkel on properly.
When i started the bike, it seemed quiet normal when idling and then when i reved it it sounded much louder/deeper and that's when i noticed that i forgot to put the snorkel back on so i fitted it back properly...
I kind of like the sound of the bike without the snorkel 8)
Would it hurt the bike if i remove it for good?
Thx everyone
User avatar
MrWasabi
Team Kuda
Team Kuda
Posts: 2039
Joined: Tue Feb 12, 2008 12:59 pm
Bike: ZX6R
State: New South Wales
Location: Omicron Persei 8

Re: ZZR 250: Removing airbox snorkel

Post by MrWasabi »

the point of the snorkel is to keep the air filter in place and im sure you know what the point of the air filter is.
if you remove it, the filter could move and create an open area for debris to go into the carbies and possibly cause problems.
Mistakes:
Learn from the mistakes of others. You won't live long enough to make all of them yourself.
http://www.sentechcomputers.com.au
PaulF
Newbie
Posts: 30
Joined: Tue Jan 29, 2008 10:10 pm
Bike: Ninja 250
State: New South Wales
Location: NSW

Re: ZZR 250: Removing airbox snorkel

Post by PaulF »

Hey mate,
i just tried the bike without it and it looks like the carbies need rejetting ..
On high RPM, the bike started misssing...
I don't want to rejet and i guess what you said makes a good point so the snorkel is back on again :)
Cheers
Post Reply