Rebound Problem????

For general Technical and Performance Discussions
Post Reply
User avatar
Burky
VIP MEMBER
VIP MEMBER
Posts: 1646
Joined: Fri Apr 14, 2006 12:20 am
Bike: ZX10R
State: New South Wales
Location: NSW Padstow

Rebound Problem????

Post by Burky »

After playing around with the rear (suspension) the rebound still seems slow to return. The dial on the bottom of the shock will keep turning and does not seem to have any impact on settings. Once you sit on the bike the rear drops a little, bounce on it and it will drop a little further but does not return quick at all. Is this common on sports bikes? a mate who rides dirt bikes said that it should return quicker than that. Any idea's would be great.

The bike was always hard in the ass but just wanted to get it a bit softer.
"I live in my own little world. But it's OK. They know me here"
User avatar
MadKaw
Administrator
Administrator
Posts: 9671
Joined: Tue Apr 20, 2004 4:33 pm
Bike: ZX10R
State: New South Wales
Location: Windsor or the Creek..
Contact:

Post by MadKaw »

The dial on the bottom has 4 positions on it.
If you look closely and its clean you will see the numbers 1 to 4 on the dial. 1 being softest 4 being hardest although at this age the shock probly needs a rebuild so put it on 3 or 4 but it may not make much difference...
Try adjusting the preload..
Dave
2010 Z1000
ex bikes
05 ZX-10R Race Bike - No.77
95 ZXR750R M Race Bike - No. 75
98 ZX9R Race Bike - No. 000
zx6r, zx7r, GPX750, GPX500, lots of KX's.
Image
I ride way too fast to worry about cholesterol
User avatar
Burky
VIP MEMBER
VIP MEMBER
Posts: 1646
Joined: Fri Apr 14, 2006 12:20 am
Bike: ZX10R
State: New South Wales
Location: NSW Padstow

Post by Burky »

Thanks Dave.
The pre-load has been rereased from max to about 75%. The previous owner set it to max although he weighed a hell of a lot more than me.
I will loosen of the pre-load some more and try that.
"I live in my own little world. But it's OK. They know me here"
mrmina
Apprentice Post Whore :-)
Apprentice Post Whore :-)
Posts: 7039
Joined: Wed Apr 21, 2004 8:11 pm
Location: Sydenham, Victoria

Post by mrmina »

mate i got mine rebuilt and its on 2.
[url]www.rmsmg.com.au
User avatar
Burky
VIP MEMBER
VIP MEMBER
Posts: 1646
Joined: Fri Apr 14, 2006 12:20 am
Bike: ZX10R
State: New South Wales
Location: NSW Padstow

Post by Burky »

Just out of curiosity what is a rebuild worth aprox :?:
"I live in my own little world. But it's OK. They know me here"
User avatar
Neka79
Extreme Post Whore :-)
Extreme Post Whore :-)
Posts: 13115
Joined: Fri Apr 23, 2004 12:20 am
Bike: Z900
State: South Australia
Location: Adelaide......nah its cool..no really!!
Contact:

Post by Neka79 »

mrmina wrote:mate i got mine rebuilt and its on 2.
thats cos ur a big unit!!
Neka
2006 Zeddy 1000
1996 VS series 2 S pak Ute
Image
mrmina
Apprentice Post Whore :-)
Apprentice Post Whore :-)
Posts: 7039
Joined: Wed Apr 21, 2004 8:11 pm
Location: Sydenham, Victoria

Post by mrmina »

burkys_ninja wrote:Just out of curiosity what is a rebuild worth aprox :?:
it was $170 from memory.

that was oiled, gased, bushed, shimmed.

mine has no rebound. when u compressed the rear suspension using the love handles, it took ages to come back up. I did mine at about 30,000kms.
[url]www.rmsmg.com.au
User avatar
Strika
VIP MEMBER
VIP MEMBER
Posts: 8373
Joined: Tue Feb 01, 2005 8:02 am
Bike: Yamaha
State: Victoria
Location: Melbourne

Post by Strika »

mrmina wrote:
burkys_ninja wrote:Just out of curiosity what is a rebuild worth aprox :?:
it was $170 from memory.

that was oiled, gased, bushed, shimmed.

mine has no rebound. when u compressed the rear suspension using the love handles, it took ages to come back up. I did mine at about 30,000kms.
That means there is too much rebound Mina! :)
"I hate to advocate drugs, alcohol, violence or insanity to anyone, but they've always worked for me" Hunter S. Thompson.
There are really only two questions in life. 1.Which way do i go? 2.What is the lap record?
mrmina
Apprentice Post Whore :-)
Apprentice Post Whore :-)
Posts: 7039
Joined: Wed Apr 21, 2004 8:11 pm
Location: Sydenham, Victoria

Post by mrmina »

just sharing my love for bikes with the rest of ya. :)
[url]www.rmsmg.com.au
User avatar
Burky
VIP MEMBER
VIP MEMBER
Posts: 1646
Joined: Fri Apr 14, 2006 12:20 am
Bike: ZX10R
State: New South Wales
Location: NSW Padstow

Post by Burky »

mrmina Posted: Sun Oct 01, 2006 3:07 pm Post subject:


it was $170 from memory.

that was oiled, gased, bushed, shimmed.
Was that the shock or u :lol:
"I live in my own little world. But it's OK. They know me here"
User avatar
Nanna10r
Team Ninja
Posts: 4291
Joined: Wed Jul 14, 2004 10:42 pm
Bike: ZX10R
State: Queensland
Location: Brisbane Australia

Post by Nanna10r »

burkys_ninja wrote:
mrmina Posted: Sun Oct 01, 2006 3:07 pm Post subject:


it was $170 from memory.

that was oiled, gased, bushed, shimmed.
Was that the shock or u :lol:
As "Narfie" Said Mina's a BIG UNIT $170 wouldn't get him a Sponge bath let alone a full work up. :D
"Nan & Pop Racing"
Poppy Hops on .... CBR150 (Superlite) CBR954 "Blade"
Nanna Naps on .... MoriWAKI NSR85 (Motolite) ZX10R "Crim"
We may ride like Old Can'ts, But Phuk we look DOOG !!!!!!
Post Reply