Exhausts - Z750 (Now with crash pics - Cos we all love pics!

[mike-s]

Hey, there's nothing that knowing someone with skill & a tig welder wont fix. Someone on another forum has a sv650 with a stock system and he got hold of a midpipe and can from a gsxr or something and one of the local exhaust joints was able to mandrel bend the pipes to blend perfectly & cut/welded everything to suit perfectly and you would never know from looking as it was such a well done job. Only cost him about $90 for the labour at $60/hour.

Well worth considering p'raps?

[67-FKD]

Ive got a mate with a 07, i might grab his stock pipe and take it round to sunstate and see how easy they match up!

[Damon Z1000]

Mate have a look at some of the creations on the zed site, I saw a thou the other day with one of the newer side exit Gixxer/ R6 pipes on it and it looked awesome, but fark it would have been loud!

[67-FKD]

o0o0o0 micron have a similar pipe, its like a GP/Screamer pipe, im half considering it, its what i would prefer but the amount of noice turns me off, i dont mind it, but its what everyone else says haha

hrmmm....

[IsleofNinja]

Geez!!! Glad to hear the leg's ok mate -- close call
As for the can , I'm sure if it were a barge and the can was a Yoshi there's still plenty left to make a shorty

I'm pretty sure the Hoffymobile/Strikernator run at least say 3 maybe 4 inches worth of Yoshimura can on their 12's

[67-FKD]

Well, still havent got the bike back, still waiting for a bucketload of parts to arrive, ended up going with the LeoVince SBK Pipe, so i cant wait to hear how it rumbles

Sunstate says it will be a week and a half so that translates to being 3 weeks lol

[ezzazrx]

Glad to hear your o-kay, what about a kerker slip on?? onestopmoto.com type in kerker,have a squiz

[drewboy]

just do what i did mate, buy a cheap brand new muffler off egay, then get your local exhaust shop to make some pipe to get from the collector to the can, got my arrow(meant for GSXR750) for $300 delivered, chopped 100mm off the day i got it, cost $50 for the pipe (not mandrel bent though, but it's not a long section of pipe to get made) or use the pipe from your Micron.
cheers

[67-FKD]

Well ill finally get to hear this Leovince SBK In all her glory tomorrow when FINALLY after almost 3 MONTHS i get my bike back!

Expect a report back tomorrow! May even post a vid so you can hear the noise