awesome thread revival BTW
Bleeding brakes
-
Gosling1
- Team Donut
- Posts: 13826
- Joined: Mon Jun 20, 2005 9:30 pm
- Bike: ZX2R
- State: New South Wales
- Location: Anarchy Road
- Contact:
Re: Bleeding brakes
Pitchin' a tent mate ??
awesome thread revival BTW
awesome thread revival BTW
".....shut the gate on this one Maxie......it's the ducks guts !!............."
-
seiko1
- Apprentice Post Whore :-)
- Posts: 7643
- Joined: Wed Jan 14, 2009 8:36 pm
- Bike: ZX14R
- State: Victoria
- Location: Geelong
Re: Bleeding brakes
This place has gone to the dogs ffs!Wattie wrote:I used the suck method, took me a few sucks on each ball to get the cum out, then BANG!
FUCKIN ROCK HARD COCK!!!!!!!!!!
i sucked each side a few times to make sure i got it all out,
god dam i cant belive the improvement in the solidness of them!
im so happy with the result. and all this while still using the penis enlarging cylinder!
fucking topS!
Policy - Find something simple.....and Complicate it!
Re: Bleeding brakes
Dude you don't even need to change it, you just have to quote out of context...Wattie wrote:i pumped for like 2 hours, i've got some fluid through and into a bottle, but cant get a good stream going.
Tony
I have become race...
I have become race...
the kid wrote:But remember one thing , Dave #3 watches videos of rampant Circus Ponies every time Cath goes down the street shopping so dont listen to anything he says .
-
Wattie
- VIP MEMBER
- Posts: 10041
- Joined: Mon Oct 31, 2005 12:23 pm
- Bike: ZX10R
- State: New South Wales
- Location: Bligh Park
Re: Bleeding brakes
Bogan wrote:Dude you don't even need to change it, you just have to quote out of context...Wattie wrote:i pumped for like 2 hours, i've got some fluid through and into a bottle, but cant get a good stream going.
Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
Re: Bleeding brakes
OK so all jokes of pumping and sucking aside, anyone know if this would work on a hydraulic clutch? It doesn't meet any firm resistance at the end of the lever travel, does this make a difference?
I also don't see how the air gets out of the lines with the cable tie, I would have thought that any air along with the brake fluid would be trapped within the lines/master cylinder/calipers with the master cylinder piston at one end and the caliper pistons at the other end, after all if this method can force air out of the system why doesn't the brake fluid follow suit if there's an opening?
I also don't see how the air gets out of the lines with the cable tie, I would have thought that any air along with the brake fluid would be trapped within the lines/master cylinder/calipers with the master cylinder piston at one end and the caliper pistons at the other end, after all if this method can force air out of the system why doesn't the brake fluid follow suit if there's an opening?
Tony
I have become race...
I have become race...
the kid wrote:But remember one thing , Dave #3 watches videos of rampant Circus Ponies every time Cath goes down the street shopping so dont listen to anything he says .
-
robracer
- VIP MEMBER
- Posts: 15251
- Joined: Thu Feb 24, 2005 8:23 pm
- Bike: ZX6R
- State: New South Wales
- Location: Port Macquarie
Re: Bleeding brakes
The bubbles will rise to the opening in the MC in theory Tony...
There will always be bubbles in your fluid , ones that you cant see & the ones that are trapped in kinks in the passages, short of turning the bike upside down to let gravity shift the the hard ones all you can do is a good bleed & live with the result.
The new radial MC's have bleed nipples at the top of the line so you can get as much out as possible
There will always be bubbles in your fluid , ones that you cant see & the ones that are trapped in kinks in the passages, short of turning the bike upside down to let gravity shift the the hard ones all you can do is a good bleed & live with the result.
The new radial MC's have bleed nipples at the top of the line so you can get as much out as possible
Re: Bleeding brakes
OK so after checking a couple of days later it's back to a bit spongy, I guess the theory I read somewhere is correct that the cable tie just compresses the bubbles for a while, and the effect wears off. Still, I still have front brakes, and it's no biggie to bleed up some better ones 
.
.Tony
I have become race...
I have become race...
the kid wrote:But remember one thing , Dave #3 watches videos of rampant Circus Ponies every time Cath goes down the street shopping so dont listen to anything he says .
Re: Bleeding brakes
Fuggin Rock Hard Lever !!!!!