Ivan's Smog Removal Kit

For general Technical and Performance Discussions
Post Reply
User avatar
Baddie
KSRC Member
KSRC Member
Posts: 310
Joined: Sat Oct 02, 2010 9:02 am
Bike: ZX10R
State: New South Wales
Location: Glenmore Park
Contact:

Ivan's Smog Removal Kit

Post by Baddie »

Has anyone used "Ivan's Smog Removal Kit"

As I need to installed something to stop air running though (pairing valve) or this will damage my Auto tuner.(false reading)

http://www.ivansperformanceproducts.com/other.htm
http://superbikesource.com.au/
For aftermarket racing products, from Annitori Quickshifters to Race fairings.

http://tarmactalk.com/forum/forum.php
User avatar
Deanoseadog
Warming up
Warming up
Posts: 80
Joined: Sat Feb 26, 2011 2:10 pm
Bike: Other Kawi
State: New South Wales
Location: Newcastle

Re: Ivan's Smog Removal Kit

Post by Deanoseadog »

I made my own for my old Cagiva Raptor. The Suzuki system is really basic. You can just block it off (at either end), or remove the whole system and block off the holes, which is what I did.
Which bike is it for?
They normally just suck or pump air from the airbox into the exhaust port. If you want it to look "factory" you can just plug the pipes and reinstall.
Hope that helps.
User avatar
Wattie
VIP MEMBER
VIP MEMBER
Posts: 10041
Joined: Mon Oct 31, 2005 12:23 pm
Bike: ZX10R
State: New South Wales
Location: Bligh Park

Re: Ivan's Smog Removal Kit

Post by Wattie »

Kawasakis are the same, you can simply just block off what's there. As long as the hose from the airbox is blocked you're set
Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
Post Reply