Exhaust 'popping' on overrun

Post by **Wattie** » Thu Feb 15, 2007 10:28 am

im practicing

Post by **Wattie** » Thu Feb 15, 2007 4:08 pm

its on the back of my licence so you can see the size.

deafwish · Post by **deafwish** » Thu Feb 15, 2007 4:19 pm

Awesome! Thanks mate.
What brand is it (if any)?

Post by **Wattie** » Fri Feb 16, 2007 8:06 am

nylex

kawa zx12R · Post by **kawa zx12R** » Fri Feb 16, 2007 10:48 am

wattie, have you had the chance to pull it out yet...

i'm not the best of doing mechanical alterations. so i'm keeping away from doing it.

BTW is North richmond in VIC or NSW.

Post by **Wattie** » Fri Feb 16, 2007 2:25 pm

nsw mate.

its been out and back in. in about 10 mins.

deafwish · Post by **deafwish** » Fri Feb 16, 2007 3:31 pm

Did you need to remove the tank?
I'm thinking not.....

Post by **Wattie** » Sat Feb 17, 2007 6:22 am

nope, when i installed it, i undid the tank and propped it up, but about 1cm out of the rubber hose about 1/2 way along (the hose coming from airbox to the T)
and stuck the tap in, then put the tank back down.

now its in, i can get my hand up to turn it on and off, and managed to pull it out with the tank mounted as normal.

no mechanical knowledge really needed. if you can cut rubber you can do it.

Post by **robracer** » Sun Feb 18, 2007 8:11 pm

Wattie wrote:nope, when i installed it, i undid the tank and propped it up, but about 1cm out of the rubber hose about 1/2 way along (the hose coming from airbox to the T)
and stuck the tap in, then put the tank back down.

now its in, i can get my hand up to turn it on and off, and managed to pull it out with the tank mounted as normal.

no mechanical knowledge really needed. if you can cut rubber you can do it.

Mate just saw your post from YT what did you mean when you said would keep it?
BTW that flame looks awesome

Post by **Wattie** » Mon Feb 19, 2007 5:56 am

meaning, if mine made flames like that with the kleen system, i'd be leaving it as is...

deafwish · Post by **deafwish** » Mon Mar 26, 2007 7:28 pm

I got bored of the flameless silence so I just removed the block off insert and opened the hose up again.
I'm thinking that Nylex tap makes it real easy to change from one to the other, when you get bored.....
I went for a ride with a good mate the other weekend and he asked me why my bike had stopped 'spitting fire' at him.....

Anyone know who stocks these Nylex taps, in Melbourne?

Daz.

Post by **Wattie** » Mon Mar 26, 2007 7:45 pm

do you have bunnings?? or any big hardware place?? or perhaps a nursery with sprinklers??

shrike · Post by **shrike** » Mon Mar 26, 2007 8:19 pm

LOL that's the spirit!

Mine pops and farts and generally carries on on overrun, ESPECIALLY on a hot day with shitty (read below 98RON) fuel.

Damn race maps and lack of cats and O2 sensors!

deafwish · Post by **deafwish** » Mon Mar 26, 2007 9:19 pm

Dave,
By that response, I'm guessing you can get them from just about anywhere!

Shrike,
Tried sprinkling some Vtec powder in with that 1:25 coffee/ fuel mix?
Next time you're down at Scabs, ask one of the drunken ricers parked out the front of that kebab shop, next to the Lookout. He will fix you up..... lol!!!!
Daz.

shrike · Post by **shrike** » Tue Mar 27, 2007 2:05 pm

Blinker fluid!

That's what i need!

or maybe it's not enough coffee. Isn't it supposed to hiss and steam?